[dune-fem] Dune fem 1.4 error DUNE_TEST_2.3.0_VERSION

[Agnese, Marco]

Hi Tobias,
I created another project depending only on dune-localfunctions but I have obtained the same error. Than I created another project with a name which not contains "." and everything worked fine. Therefore the error depends on the fact that it tries to set a variable variable name which contains "." .  
Do you think that I have to report on the dune malinglist this bug? Or this behavior is the correct one?
best Marco. 
________________________________________
From: Tobias Malkmus [tomalk at mathematik.uni-freiburg.de]
Sent: Wednesday, April 23, 2014 2:12 PM
To: Agnese, Marco; dune-fem at dune-project.org
Subject: Re: [dune-fem] Dune fem 1.4 error DUNE_TEST_2.3.0_VERSION

Hi Maro

Does this error occur if dune-fem is not installed ?
If yes then this is a core module related bug.
Otherwise, please send me the config logs of your new created module.

Best Tobias

On 04/23/2014 03:07 PM, Agnese, Marco wrote:
> Hello,
> I have compiled the new dune-fem 1.4 with the dune modules 2.3 without any problem (except a warning for the absence of dune-alugrid). After that I created a new project (dune-test-2.3.0) and I try to compile only this module with the same option files that I used to compile dune-fem. I received the following error:
>
> --- going to build dune-test-2.3.0  ---
> --- calling all for dune-test-2.3.0 ---
> --- calling vcsetup for dune-test-2.3.0 ---
> --- calling autogen for dune-test-2.3.0 ---
> WARNING: could not find module dune-alugrid,
>         module is also unknown to pkg-config.
>         Maybe you need to adjust PKG_CONFIG_PATH!
>         dune-alugrid is suggested by dune-fem
> Skipping dune-alugrid!
> Found am directory /usr/local_machine/dune-2.3.0/dune-common-2.3.0/am
> --> dunedoxynize...
> Generating doc/doxygen/Doxyfile.in from
>      global style
>      and dune-test-2.3.0 config
>      ... done
> --> libtoolize...
> libtoolize: putting auxiliary files in `.'.
> libtoolize: linking file `./ltmain.sh'
> libtoolize: You should add the contents of the following files to `aclocal.m4':
> libtoolize:   `/usr/share/aclocal/libtool.m4'
> libtoolize:   `/usr/share/aclocal/ltoptions.m4'
> libtoolize:   `/usr/share/aclocal/ltversion.m4'
> libtoolize:   `/usr/share/aclocal/ltsugar.m4'
> libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
> libtoolize: Remember to add `LT_INIT' to configure.ac.
> libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
> libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
> libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
> --> writing /home/ma/m/ma2413/dune/dune-test-2.3.0/dependencies.m4
>      for dune-test-2.3.0 1.0 ma2413 at imperial.ac.uk
>          requires  dune-fem
>          suggests
> WARNING: could not find module dune-alugrid,
>         module is also unknown to pkg-config.
>         Maybe you need to adjust PKG_CONFIG_PATH!
>         dune-alugrid is suggested by dune-fem
> Skipping dune-alugrid!
> --> aclocal...
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
>       LANGUAGE = "en_GB:en",
>       LC_ALL = (unset),
>       LC_PAPER = "it_IT.UTF-8",
>       LC_ADDRESS = "it_IT.UTF-8",
>       LC_MONETARY = "it_IT.UTF-8",
>       LC_NUMERIC = "it_IT.UTF-8",
>       LC_TELEPHONE = "it_IT.UTF-8",
>       LC_IDENTIFICATION = "it_IT.UTF-8",
>       LC_MEASUREMENT = "it_IT.UTF-8",
>       LC_TIME = "it_IT.UTF-8",
>       LC_NAME = "it_IT.UTF-8",
>       LANG = "en_GB.UTF-8"
>      are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
>       LANGUAGE = "en_GB:en",
>       LC_ALL = (unset),
>       LC_TIME = "it_IT.UTF-8",
>       LC_MONETARY = "it_IT.UTF-8",
>       LC_ADDRESS = "it_IT.UTF-8",
>       LC_TELEPHONE = "it_IT.UTF-8",
>       LC_NAME = "it_IT.UTF-8",
>       LC_MEASUREMENT = "it_IT.UTF-8",
>       LC_IDENTIFICATION = "it_IT.UTF-8",
>       LC_NUMERIC = "it_IT.UTF-8",
>       LC_PAPER = "it_IT.UTF-8",
>       LANG = "en_GB.UTF-8"
>      are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
> configure.ac:4: error: AC_SUBST: `DUNE_TEST_2.3.0_VERSION' is not a valid shell variable name
> /usr/local_machine/dune-2.3.0/dune-common-2.3.0/m4/dune.m4:186: DUNE_PARSE_MODULE_VERSION is expanded from...
> configure.ac:4: the top level
> autom4te: /usr/bin/m4 failed with exit status: 1
> aclocal: autom4te failed with exit status: 1
> --- Failed to build dune-test-2.3.0 ---
> Terminating dunecontrol due to previous errors!
>
> I do not know what is it and how to fix it.
> Thank you very much,
> regards,
> Marco.
>
> _______________________________________________
> dune-fem mailing list
> dune-fem at dune-project.org
> http://lists.dune-project.org/mailman/listinfo/dune-fem
>
>


--
Tobias Malkmus                 <tomalk at mathematik.uni-freiburg.de>

Mathematisches Institut               Tel: +49 761 203 5627
Abt. für Angewandte Mathematik        Universität Freiburg
Hermann-Herder-Str. 10
79104 Freiburg