[Dune] Verwendung von DUNE und der aktuellen UG-Version

lenzen at scai.fraunhofer.de lenzen at scai.fraunhofer.de
Wed May 23 22:31:25 CEST 2007


Hello Christian,

the call
autogen.sh --prefix=./ --enable-dune CC=g++
gets the appended file junk.txt as output. I don't get a configure to
execute (the call is commented out in autogen.sh).
I piped version info into version.txt.
I also appended every non-distribution file which was generated by the
above call (excluding possible files generated in subdirectories).

Christoph

Christian Engwer wrote:
> Hi,
>
>> I've seen such errors before only when using inappropriate
>> (==old) versions of automake and autoconf.  However the
>> ones you say you're using (autoconf 2.59; automake 1.9.6)
>> should be okay.  So I'm a bit short of good ideas here.
>> Maybe some AutoTools expert on the list can help?
>
> In order to help, it would be useful to have the logs and error
> messages. What did fail? autogen.sh? configure?
>
> Christian
>

-------------- next part --------------
No compiler set, using GNU compiler as default
--> libtoolize...
You should update your `aclocal.m4' by running aclocal.
--> aclocal...
--> autoheader...
--> automake...
dev/Makefile.am:16: Libtool library used but `LIBTOOL' is undefined
dev/Makefile.am:16: 
dev/Makefile.am:16: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/Makefile.am:16: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/meta/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
dev/meta/Makefile.am:5: 
dev/meta/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/meta/Makefile.am:5: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/ppm/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
dev/ppm/Makefile.am:5: 
dev/ppm/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/ppm/Makefile.am:5: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/ps/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
dev/ps/Makefile.am:5: 
dev/ps/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/ps/Makefile.am:5: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/rif/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
dev/rif/Makefile.am:5: 
dev/rif/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/rif/Makefile.am:5: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/sif/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
dev/sif/Makefile.am:5: 
dev/sif/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/sif/Makefile.am:5: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/xif/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined
dev/xif/Makefile.am:9: 
dev/xif/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/xif/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again.
dev/xif/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined
dev/xif/Makefile.am:7: 
dev/xif/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dev/xif/Makefile.am:7: to `configure.ac' and run `aclocal' and `autoconf' again.
dom/lgm/Makefile.am:25: Libtool library used but `LIBTOOL' is undefined
dom/lgm/Makefile.am:25: 
dom/lgm/Makefile.am:25: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dom/lgm/Makefile.am:25: to `configure.ac' and run `aclocal' and `autoconf' again.
dom/lgm/ngin/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined
dom/lgm/ngin/Makefile.am:9: 
dom/lgm/ngin/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dom/lgm/ngin/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again.
dom/lgm/ngin2d/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined
dom/lgm/ngin2d/Makefile.am:9: 
dom/lgm/ngin2d/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dom/lgm/ngin2d/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again.
dom/std/Makefile.am:24: Libtool library used but `LIBTOOL' is undefined
dom/std/Makefile.am:24: 
dom/std/Makefile.am:24: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
dom/std/Makefile.am:24: to `configure.ac' and run `aclocal' and `autoconf' again.
gm/Makefile.am:35: Libtool library used but `LIBTOOL' is undefined
gm/Makefile.am:35: 
gm/Makefile.am:35: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
gm/Makefile.am:35: to `configure.ac' and run `aclocal' and `autoconf' again.
gm/gg2/Makefile.am:10: Libtool library used but `LIBTOOL' is undefined
gm/gg2/Makefile.am:10: 
gm/gg2/Makefile.am:10: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
gm/gg2/Makefile.am:10: to `configure.ac' and run `aclocal' and `autoconf' again.
gm/gg3/Makefile.am:10: Libtool library used but `LIBTOOL' is undefined
gm/gg3/Makefile.am:10: 
gm/gg3/Makefile.am:10: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
gm/gg3/Makefile.am:10: to `configure.ac' and run `aclocal' and `autoconf' again.
graphics/Makefile.am:19: Libtool library used but `LIBTOOL' is undefined
graphics/Makefile.am:19: 
graphics/Makefile.am:19: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
graphics/Makefile.am:19: to `configure.ac' and run `aclocal' and `autoconf' again.
graphics/grape/Makefile.am:15: Libtool library used but `LIBTOOL' is undefined
graphics/grape/Makefile.am:15: 
graphics/grape/Makefile.am:15: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
graphics/grape/Makefile.am:15: to `configure.ac' and run `aclocal' and `autoconf' again.
graphics/uggraph/Makefile.am:15: Libtool library used but `LIBTOOL' is undefined
graphics/uggraph/Makefile.am:15: 
graphics/uggraph/Makefile.am:15: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
graphics/uggraph/Makefile.am:15: to `configure.ac' and run `aclocal' and `autoconf' again.
lib/Makefile.am:31: Libtool library used but `LIBTOOL' is undefined
lib/Makefile.am:31: 
lib/Makefile.am:31: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
lib/Makefile.am:31: to `configure.ac' and run `aclocal' and `autoconf' again.
low/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
low/Makefile.am:3: 
low/Makefile.am:3: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
low/Makefile.am:3: to `configure.ac' and run `aclocal' and `autoconf' again.
np/Makefile.am:23: Libtool library used but `LIBTOOL' is undefined
np/Makefile.am:23: 
np/Makefile.am:23: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/Makefile.am:23: to `configure.ac' and run `aclocal' and `autoconf' again.
np/algebra/Makefile.am:17: Libtool library used but `LIBTOOL' is undefined
np/algebra/Makefile.am:17: 
np/algebra/Makefile.am:17: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/algebra/Makefile.am:17: to `configure.ac' and run `aclocal' and `autoconf' again.
np/amglib/Makefile.am:17: Libtool library used but `LIBTOOL' is undefined
np/amglib/Makefile.am:17: 
np/amglib/Makefile.am:17: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/amglib/Makefile.am:17: to `configure.ac' and run `aclocal' and `autoconf' again.
np/field/Makefile.am:17: Libtool library used but `LIBTOOL' is undefined
np/field/Makefile.am:17: 
np/field/Makefile.am:17: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/field/Makefile.am:17: to `configure.ac' and run `aclocal' and `autoconf' again.
np/procs/Makefile.am:19: Libtool library used but `LIBTOOL' is undefined
np/procs/Makefile.am:19: 
np/procs/Makefile.am:19: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/procs/Makefile.am:19: to `configure.ac' and run `aclocal' and `autoconf' again.
np/slu/Makefile.am:19: Libtool library used but `LIBTOOL' is undefined
np/slu/Makefile.am:19: 
np/slu/Makefile.am:19: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/slu/Makefile.am:19: to `configure.ac' and run `aclocal' and `autoconf' again.
np/slu/cblas/Makefile.am:18: Libtool library used but `LIBTOOL' is undefined
np/slu/cblas/Makefile.am:18: 
np/slu/cblas/Makefile.am:18: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/slu/cblas/Makefile.am:18: to `configure.ac' and run `aclocal' and `autoconf' again.
np/slu/src/Makefile.am:17: Libtool library used but `LIBTOOL' is undefined
np/slu/src/Makefile.am:17: 
np/slu/src/Makefile.am:17: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/slu/src/Makefile.am:17: to `configure.ac' and run `aclocal' and `autoconf' again.
np/udm/Makefile.am:17: Libtool library used but `LIBTOOL' is undefined
np/udm/Makefile.am:17: 
np/udm/Makefile.am:17: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
np/udm/Makefile.am:17: to `configure.ac' and run `aclocal' and `autoconf' again.
parallel/Makefile.am:11: Libtool library used but `LIBTOOL' is undefined
parallel/Makefile.am:11: 
parallel/Makefile.am:11: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
parallel/Makefile.am:11: to `configure.ac' and run `aclocal' and `autoconf' again.
parallel/ddd/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined
parallel/ddd/Makefile.am:9: 
parallel/ddd/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
parallel/ddd/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again.
parallel/dddif/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
parallel/dddif/Makefile.am:3: 
parallel/dddif/Makefile.am:3: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
parallel/dddif/Makefile.am:3: to `configure.ac' and run `aclocal' and `autoconf' again.
parallel/ppif/MPI/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined
parallel/ppif/MPI/Makefile.am:9: 
parallel/ppif/MPI/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
parallel/ppif/MPI/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again.
parallel/util/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
parallel/util/Makefile.am:3: 
parallel/util/Makefile.am:3: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
parallel/util/Makefile.am:3: to `configure.ac' and run `aclocal' and `autoconf' again.
ui/Makefile.am:19: Libtool library used but `LIBTOOL' is undefined
ui/Makefile.am:19: 
ui/Makefile.am:19: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
ui/Makefile.am:19: to `configure.ac' and run `aclocal' and `autoconf' again.
-------------- next part --------------
g++ -v
Lese Spezifikationen von /usr/lib/gcc/i386-redhat-linux/3.4.6/specs
Konfiguriert mit: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=i386-redhat-linux
Thread-Modell: posix
gcc-Version 3.4.6 20060404 (Red Hat 3.4.6-8)
autoconf -V
autoconf (GNU Autoconf) 2.59
Written by David J. MacKenzie and Akim Demaille.

Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
automake --version
automake (GNU automake) 1.9.6
Written by Tom Tromey <tromey at redhat.com>.

Copyright 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-------------- next part --------------
# generated automatically by aclocal 1.9.6 -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005  Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
	 [AM_AUTOMAKE_VERSION([1.9.6])])

# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_CONDITIONAL                                            -*- Autoconf -*-

# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 7

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
 ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])


# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 8

# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
      # Solaris 8's {/usr,}/bin/sh.
      touch sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])

# Generate code to set up dependency tracking.              -*- Autoconf -*-

# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

#serial 3

# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # So let's grep whole file.
  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
    dirpart=`AS_DIRNAME("$mf")`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`AS_DIRNAME(["$file"])`
    AS_MKDIR_P([$dirpart/$fdir])
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS


# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])

# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 8

# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])

# Do all the work for Automake.                             -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 12

# This macro actually does too much.  Some checks are only needed if
# your package does certain things.  But this isn't really a big deal.

# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out.  PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition.  After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names.  We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
   test -f $srcdir/config.status; then
  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi

# test whether we have cygpath
if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
fi
AC_SUBST([CYGPATH_W])

# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
 AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
	      		     [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
                  [_AM_DEPENDENCIES(CC)],
                  [define([AC_PROG_CC],
                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_CXX],
                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])


# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  The stamp files are numbered to have different names.

# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $1 | $1:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])

# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 2

# Check whether the underlying file-system supports filenames
# with a leading dot.  For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
  am__leading_dot=.
else
  am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])

# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 5

# AM_PROG_LEX
# -----------
# Autoconf leaves LEX=: if lex or flex can't be found.  Change that to a
# "missing" invocation, for better error output.
AC_DEFUN([AM_PROG_LEX],
[AC_PREREQ(2.50)dnl
AC_REQUIRE([AM_MISSING_HAS_RUN])dnl
AC_REQUIRE([AC_PROG_LEX])dnl
if test "$LEX" = :; then
  LEX=${am_missing_run}flex
fi])

# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
# From Jim Meyering

# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

AC_DEFUN([AM_MAINTAINER_MODE],
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
  dnl maintainer-mode is disabled by default
  AC_ARG_ENABLE(maintainer-mode,
[  --enable-maintainer-mode  enable make rules and dependencies not useful
			  (and sometimes confusing) to the casual installer],
      USE_MAINTAINER_MODE=$enableval,
      USE_MAINTAINER_MODE=no)
  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
  MAINT=$MAINTAINER_MODE_TRUE
  AC_SUBST(MAINT)dnl
]
)

AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])

# Check to see how 'make' treats includes.	            -*- Autoconf -*-

# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 3

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
	@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote="\""
      _am_result=BSD
   fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])

# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])


# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
  am_missing_run="$MISSING --run "
else
  am_missing_run=
  AC_MSG_WARN([`missing' script is too old or missing])
fi
])

# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake.  There are at least two reasons why we must not
# use `-m 0755':
#   - it causes special bits like SGID to be ignored,
#   - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out.  Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
  # We used to keeping the `.' as first argument, in order to
  # allow $(mkdir_p) to be used without argument.  As in
  #   $(mkdir_p) $(somedir)
  # where $(somedir) is conditionally defined.  However this is wrong
  # for two reasons:
  #  1. if the package is installed by a user who cannot write `.'
  #     make install will fail,
  #  2. the above comment should most certainly read
  #     $(mkdir_p) $(DESTDIR)$(somedir)
  #     so it does not work when $(somedir) is undefined and
  #     $(DESTDIR) is not.
  #  To support the latter case, we have to write
  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
  #  so the `.' trick is pointless.
  mkdir_p='mkdir -p --'
else
  # On NextStep and OpenStep, the `mkdir' command does not
  # recognize any option.  It will interpret all options as
  # directories to create, and then abort because `.' already
  # exists.
  for d in ./-p ./--version;
  do
    test -d $d && rmdir $d
  done
  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
  if test -f "$ac_aux_dir/mkinstalldirs"; then
    mkdir_p='$(mkinstalldirs)'
  else
    mkdir_p='$(install_sh) -d'
  fi
fi
AC_SUBST([mkdir_p])])

# Helper functions for option handling.                     -*- Autoconf -*-

# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 3

# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME.  Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])

# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

# Check to make sure that the build environment is sane.    -*- Autoconf -*-

# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
   if test "$[*]" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftest.file`
   fi
   rm -f conftest.file
   if test "$[*]" != "X $srcdir/configure conftest.file" \
      && test "$[*]" != "X conftest.file $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
alias in your environment])
   fi

   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'.  However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# Check how to create a tarball.                            -*- Autoconf -*-

# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 2

# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
#     tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
#     $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
     [m4_case([$1], [ustar],, [pax],,
              [m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
  case $_am_tool in
  gnutar)
    for _am_tar in tar gnutar gtar;
    do
      AM_RUN_LOG([$_am_tar --version]) && break
    done
    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
    am__untar="$_am_tar -xf -"
    ;;
  plaintar)
    # Must skip GNU tar: if it does not support --format= it doesn't create
    # ustar tarball either.
    (tar --version) >/dev/null 2>&1 && continue
    am__tar='tar chf - "$$tardir"'
    am__tar_='tar chf - "$tardir"'
    am__untar='tar xf -'
    ;;
  pax)
    am__tar='pax -L -x $1 -w "$$tardir"'
    am__tar_='pax -L -x $1 -w "$tardir"'
    am__untar='pax -r'
    ;;
  cpio)
    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
    am__untar='cpio -i -H $1 -d'
    ;;
  none)
    am__tar=false
    am__tar_=false
    am__untar=false
    ;;
  esac

  # If the value was cached, stop now.  We just wanted to have am__tar
  # and am__untar set.
  test -n "${am_cv_prog_tar_$1}" && break

  # tar/untar a dummy directory, and stop if the command works
  rm -rf conftest.dir
  mkdir conftest.dir
  echo GrepMe > conftest.dir/file
  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
  rm -rf conftest.dir
  if test -s conftest.tar; then
    AM_RUN_LOG([$am__untar <conftest.tar])
    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
  fi
done
rm -rf conftest.dir

AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR

m4_include([m4/acx_mpi.m4])
m4_include([m4/dune_mpi.m4])
-------------- next part --------------
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.

scriptversion=2005-05-14.22

# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey at cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# This file is maintained in Automake, please report
# bugs to <bug-automake at gnu.org> or send patches to
# <automake-patches at gnu.org>.

case $1 in
  '')
     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
     exit 1;
     ;;
  -h | --h*)
    cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]

Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.

If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.

Report bugs to <bug-automake at gnu.org>.
EOF
    exit $?
    ;;
  -v | --v*)
    echo "compile $scriptversion"
    exit $?
    ;;
esac

ofile=
cfile=
eat=

for arg
do
  if test -n "$eat"; then
    eat=
  else
    case $1 in
      -o)
	# configure might choose to run compile as `compile cc -o foo foo.c'.
	# So we strip `-o arg' only if arg is an object.
	eat=1
	case $2 in
	  *.o | *.obj)
	    ofile=$2
	    ;;
	  *)
	    set x "$@" -o "$2"
	    shift
	    ;;
	esac
	;;
      *.c)
	cfile=$1
	set x "$@" "$1"
	shift
	;;
      *)
	set x "$@" "$1"
	shift
	;;
    esac
  fi
  shift
done

if test -z "$ofile" || test -z "$cfile"; then
  # If no `-o' option was seen then we might have been invoked from a
  # pattern rule where we don't need one.  That is ok -- this is a
  # normal compilation that the losing compiler can handle.  If no
  # `.c' file was seen then we are probably linking.  That is also
  # ok.
  exec "$@"
fi

# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`

# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file.  Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
while true; do
  if mkdir "$lockdir" >/dev/null 2>&1; then
    break
  fi
  sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15

# Run the compile.
"$@"
ret=$?

if test -f "$cofile"; then
  mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
  mv "${cofile}bj" "$ofile"
fi

rmdir "$lockdir"
exit $ret

# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
-------------- next part --------------
#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.

timestamp='2003-06-17'

# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Originally written by Per Bothner <per at bothner.com>.
# Please send patches to <config-patches at gnu.org>.  Submit a context
# diff and a properly formatted ChangeLog entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit build system type.

me=`echo "$0" | sed -e 's,.*/,,'`

usage="\
Usage: $0 [OPTION]

Output the configuration name of the system \`$me' is run on.

Operation modes:
  -h, --help         print this help, then exit
  -t, --time-stamp   print date of last modification, then exit
  -v, --version      print version number, then exit

Report bugs and patches to <config-patches at gnu.org>."

version="\
GNU config.guess ($timestamp)

Originally written by Per Bothner.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.

This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

help="
Try \`$me --help' for more information."

# Parse command line
while test $# -gt 0 ; do
  case $1 in
    --time-stamp | --time* | -t )
       echo "$timestamp" ; exit 0 ;;
    --version | -v )
       echo "$version" ; exit 0 ;;
    --help | --h* | -h )
       echo "$usage"; exit 0 ;;
    -- )     # Stop option processing
       shift; break ;;
    - )	# Use stdin as input.
       break ;;
    -* )
       echo "$me: invalid option $1$help" >&2
       exit 1 ;;
    * )
       break ;;
  esac
done

if test $# != 0; then
  echo "$me: too many arguments$help" >&2
  exit 1
fi

trap 'exit 1' 1 2 15

# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.

# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.

# Portable tmp directory creation inspired by the Autoconf team.

set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
 { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
 { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
 { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
 { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
 ,,)    echo "int x;" > $dummy.c ;
	for c in cc gcc c89 c99 ; do
	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
	     CC_FOR_BUILD="$c"; break ;
	  fi ;
	done ;
	if test x"$CC_FOR_BUILD" = x ; then
	  CC_FOR_BUILD=no_compiler_found ;
	fi
	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
esac ;'

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi at noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

## for Red Hat Linux
if test -f /etc/redhat-release ; then
    VENDOR=redhat ;
else
    VENDOR= ;
fi

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    *:NetBSD:*:*)
	# NetBSD (nbsd) targets should (where applicable) match one or
	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
	# switched to ELF, *-*-netbsd* would select the old
	# object file format.  This provides both forward
	# compatibility and a consistent mechanism for selecting the
	# object file format.
	#
	# Note: NetBSD doesn't particularly care about the vendor
	# portion of the name.  We always set it to "unknown".
	sysctl="sysctl -n hw.machine_arch"
	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
	case "${UNAME_MACHINE_ARCH}" in
	    armeb) machine=armeb-unknown ;;
	    arm*) machine=arm-unknown ;;
	    sh3el) machine=shl-unknown ;;
	    sh3eb) machine=sh-unknown ;;
	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
	esac
	# The Operating System including object format, if it has switched
	# to ELF recently, or will in the future.
	case "${UNAME_MACHINE_ARCH}" in
	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
		eval $set_cc_for_build
		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
			| grep __ELF__ >/dev/null
		then
		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
		    # Return netbsd for either.  FIX?
		    os=netbsd
		else
		    os=netbsdelf
		fi
		;;
	    *)
	        os=netbsd
		;;
	esac
	# The OS release
	# Debian GNU/NetBSD machines have a different userland, and
	# thus, need a distinct triplet. However, they do not need
	# kernel version information, so it can be replaced with a
	# suitable tag, in the style of linux-gnu.
	case "${UNAME_VERSION}" in
	    Debian*)
		release='-gnu'
		;;
	    *)
		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
		;;
	esac
	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
	# contains redundant information, the shorter form:
	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
	echo "${machine}-${os}${release}"
	exit 0 ;;
    amiga:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    hp300:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    macppc:OpenBSD:*:*)
	echo powerpc-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme88k:OpenBSD:*:*)
	echo m88k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvmeppc:OpenBSD:*:*)
	echo powerpc-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    pmax:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sgi:OpenBSD:*:*)
	echo mipseb-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sun3:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    wgrisc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    *:OpenBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    alpha:OSF1:*:*)
	if test $UNAME_RELEASE = "V4.0"; then
		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
	fi
	# According to Compaq, /usr/sbin/psrinfo has been available on
	# OSF/1 and Tru64 systems produced since 1995.  I hope that
	# covers most systems running today.  This code pipes the CPU
	# types through head -n 1, so we only detect the type of CPU 0.
	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
	case "$ALPHA_CPU_TYPE" in
	    "EV4 (21064)")
		UNAME_MACHINE="alpha" ;;
	    "EV4.5 (21064)")
		UNAME_MACHINE="alpha" ;;
	    "LCA4 (21066/21068)")
		UNAME_MACHINE="alpha" ;;
	    "EV5 (21164)")
		UNAME_MACHINE="alphaev5" ;;
	    "EV5.6 (21164A)")
		UNAME_MACHINE="alphaev56" ;;
	    "EV5.6 (21164PC)")
		UNAME_MACHINE="alphapca56" ;;
	    "EV5.7 (21164PC)")
		UNAME_MACHINE="alphapca57" ;;
	    "EV6 (21264)")
		UNAME_MACHINE="alphaev6" ;;
	    "EV6.7 (21264A)")
		UNAME_MACHINE="alphaev67" ;;
	    "EV6.8CB (21264C)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.8AL (21264B)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.8CX (21264D)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.9A (21264/EV69A)")
		UNAME_MACHINE="alphaev69" ;;
	    "EV7 (21364)")
		UNAME_MACHINE="alphaev7" ;;
	    "EV7.9 (21364A)")
		UNAME_MACHINE="alphaev79" ;;
	esac
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.
	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
	exit 0 ;;
    Alpha*:OpenVMS:*:*)
	echo alpha-hp-vms
	exit 0 ;;
    Alpha\ *:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# Should we change UNAME_MACHINE based on the output of uname instead
	# of the specific Alpha model?
	echo alpha-pc-interix
	exit 0 ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit 0 ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-unknown-sysv4
	exit 0;;
    *:[Aa]miga[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-amigaos
	exit 0 ;;
    *:[Mm]orph[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-morphos
	exit 0 ;;
    *:OS/390:*:*)
	echo i370-ibm-openedition
	exit 0 ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit 0;;
    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
	echo hppa1.1-hitachi-hiuxmpp
	exit 0;;
    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
	# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
	if test "`(/bin/universe) 2>/dev/null`" = att ; then
		echo pyramid-pyramid-sysv3
	else
		echo pyramid-pyramid-bsd
	fi
	exit 0 ;;
    NILE*:*:*:dcosx)
	echo pyramid-pyramid-svr4
	exit 0 ;;
    DRS?6000:unix:4.0:6*)
	echo sparc-icl-nx6
	exit 0 ;;
    DRS?6000:UNIX_SV:4.2*:7*)
	case `/usr/bin/uname -p` in
	    sparc) echo sparc-icl-nx7 && exit 0 ;;
	esac ;;
    sun4H:SunOS:5.*:*)
	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    i86pc:SunOS:5.*:*)
	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:6*:*)
	# According to config.sub, this is the proper way to canonicalize
	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
	# it's likely to be more like Solaris than SunOS4.
	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:*:*)
	case "`/usr/bin/arch -k`" in
	    Series*|S4*)
		UNAME_RELEASE=`uname -v`
		;;
	esac
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit 0 ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit 0 ;;
    sun*:*:4.2BSD:*)
	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
	case "`/bin/arch`" in
	    sun3)
		echo m68k-sun-sunos${UNAME_RELEASE}
		;;
	    sun4)
		echo sparc-sun-sunos${UNAME_RELEASE}
		;;
	esac
	exit 0 ;;
    aushp:SunOS:*:*)
	echo sparc-auspex-sunos${UNAME_RELEASE}
	exit 0 ;;
    # The situation for MiNT is a little confusing.  The machine name
    # can be virtually everything (everything which is not
    # "atarist" or "atariste" at least should have a processor
    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
    # to the lowercase version "mint" (or "freemint").  Finally
    # the system name "TOS" denotes a system which is actually not
    # MiNT.  But MiNT is downward compatible to TOS, so this should
    # be no problem.
    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
        echo m68k-atari-mint${UNAME_RELEASE}
	exit 0 ;;
    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
	echo m68k-atari-mint${UNAME_RELEASE}
        exit 0 ;;
    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
        echo m68k-atari-mint${UNAME_RELEASE}
	exit 0 ;;
    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
        echo m68k-milan-mint${UNAME_RELEASE}
        exit 0 ;;
    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
        echo m68k-hades-mint${UNAME_RELEASE}
        exit 0 ;;
    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
        echo m68k-unknown-mint${UNAME_RELEASE}
        exit 0 ;;
    powerpc:machten:*:*)
	echo powerpc-apple-machten${UNAME_RELEASE}
	exit 0 ;;
    RISC*:Mach:*:*)
	echo mips-dec-mach_bsd4.3
	exit 0 ;;
    RISC*:ULTRIX:*:*)
	echo mips-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    VAX*:ULTRIX*:*:*)
	echo vax-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    2020:CLIX:*:* | 2430:CLIX:*:*)
	echo clipper-intergraph-clix${UNAME_RELEASE}
	exit 0 ;;
    mips:*:*:UMIPS | mips:*:*:RISCos)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
#ifdef __cplusplus
#include <stdio.h>  /* for printf() prototype */
	int main (int argc, char *argv[]) {
#else
	int main (argc, argv) int argc; char *argv[]; {
#endif
	#if defined (host_mips) && defined (MIPSEB)
	#if defined (SYSTYPE_SYSV)
	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_SVR4)
	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
	#endif
	#endif
	  exit (-1);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c \
	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
	  && exit 0
	echo mips-mips-riscos${UNAME_RELEASE}
	exit 0 ;;
    Motorola:PowerMAX_OS:*:*)
	echo powerpc-motorola-powermax
	exit 0 ;;
    Motorola:*:4.3:PL8-*)
	echo powerpc-harris-powermax
	exit 0 ;;
    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
	echo powerpc-harris-powermax
	exit 0 ;;
    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit 0 ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit 0 ;;
    m88k:*:4*:R4*)
	echo m88k-motorola-sysv4
	exit 0 ;;
    m88k:*:3*:R3*)
	echo m88k-motorola-sysv3
	exit 0 ;;
    AViiON:dgux:*:*)
        # DG/UX returns AViiON for all architectures
        UNAME_PROCESSOR=`/usr/bin/uname -p`
	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
	then
	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
	       [ ${TARGET_BINARY_INTERFACE}x = x ]
	    then
		echo m88k-dg-dgux${UNAME_RELEASE}
	    else
		echo m88k-dg-dguxbcs${UNAME_RELEASE}
	    fi
	else
	    echo i586-dg-dgux${UNAME_RELEASE}
	fi
 	exit 0 ;;
    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
	echo m88k-dolphin-sysv3
	exit 0 ;;
    M88*:*:R3*:*)
	# Delta 88k system running SVR3
	echo m88k-motorola-sysv3
	exit 0 ;;
    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
	echo m88k-tektronix-sysv3
	exit 0 ;;
    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
	echo m68k-tektronix-bsd
	exit 0 ;;
    *:IRIX*:*:*)
	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
	exit 0 ;;
    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
    i*86:AIX:*:*)
	echo i386-ibm-aix
	exit 0 ;;
    ia64:AIX:*:*)
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
	fi
	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
	exit 0 ;;
    *:AIX:2:3)
	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
		eval $set_cc_for_build
		sed 's/^		//' << EOF >$dummy.c
		#include <sys/systemcfg.h>

		main()
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
		echo rs6000-ibm-aix3.2.5
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit 0 ;;
    *:AIX:*:[45])
	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
	fi
	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
	exit 0 ;;
    *:AIX:*:*)
	echo rs6000-ibm-aix
	exit 0 ;;
    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
	echo romp-ibm-bsd4.4
	exit 0 ;;
    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
	exit 0 ;;                           # report: romp-ibm BSD 4.3
    *:BOSX:*:*)
	echo rs6000-bull-bosx
	exit 0 ;;
    DPX/2?00:B.O.S.:*:*)
	echo m68k-bull-sysv3
	exit 0 ;;
    9000/[34]??:4.3bsd:1.*:*)
	echo m68k-hp-bsd
	exit 0 ;;
    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
	echo m68k-hp-bsd4.4
	exit 0 ;;
    9000/[34678]??:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/[678][0-9][0-9])
		if [ -x /usr/bin/getconf ]; then
		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                    case "${sc_cpu_version}" in
                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
                      532)                      # CPU_PA_RISC2_0
                        case "${sc_kernel_bits}" in
                          32) HP_ARCH="hppa2.0n" ;;
                          64) HP_ARCH="hppa2.0w" ;;
			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                        esac ;;
                    esac
		fi
		if [ "${HP_ARCH}" = "" ]; then
		    eval $set_cc_for_build
		    sed 's/^              //' << EOF >$dummy.c

              #define _HPUX_SOURCE
              #include <stdlib.h>
              #include <unistd.h>

              int main ()
              {
              #if defined(_SC_KERNEL_BITS)
                  long bits = sysconf(_SC_KERNEL_BITS);
              #endif
                  long cpu  = sysconf (_SC_CPU_VERSION);

                  switch (cpu)
              	{
              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
              	case CPU_PA_RISC2_0:
              #if defined(_SC_KERNEL_BITS)
              	    switch (bits)
              		{
              		case 64: puts ("hppa2.0w"); break;
              		case 32: puts ("hppa2.0n"); break;
              		default: puts ("hppa2.0"); break;
              		} break;
              #else  /* !defined(_SC_KERNEL_BITS) */
              	    puts ("hppa2.0"); break;
              #endif
              	default: puts ("hppa1.0"); break;
              	}
                  exit (0);
              }
EOF
		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
		    test -z "$HP_ARCH" && HP_ARCH=hppa
		fi ;;
	esac
	if [ ${HP_ARCH} = "hppa2.0w" ]
	then
	    # avoid double evaluation of $set_cc_for_build
	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
	    then
		HP_ARCH="hppa2.0w"
	    else
		HP_ARCH="hppa64"
	    fi
	fi
	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit 0 ;;
    ia64:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ia64-hp-hpux${HPUX_REV}
	exit 0 ;;
    3050*:HI-UX:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <unistd.h>
	int
	main ()
	{
	  long cpu = sysconf (_SC_CPU_VERSION);
	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
	     results, however.  */
	  if (CPU_IS_PA_RISC (cpu))
	    {
	      switch (cpu)
		{
		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
		  default: puts ("hppa-hitachi-hiuxwe2"); break;
		}
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
	echo unknown-hitachi-hiuxwe2
	exit 0 ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit 0 ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
	exit 0 ;;
    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
	echo hppa1.0-hp-mpeix
	exit 0 ;;
    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
	echo hppa1.1-hp-osf
	exit 0 ;;
    hp8??:OSF1:*:*)
	echo hppa1.0-hp-osf
	exit 0 ;;
    i*86:OSF1:*:*)
	if [ -x /usr/sbin/sysversion ] ; then
	    echo ${UNAME_MACHINE}-unknown-osf1mk
	else
	    echo ${UNAME_MACHINE}-unknown-osf1
	fi
	exit 0 ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit 0 ;;
    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit 0 ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
        exit 0 ;;
    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
	echo c34-convex-bsd
        exit 0 ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit 0 ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit 0 ;;
    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*[A-Z]90:*:*:*)
	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
	      -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*TS:*:*:*)
	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*T3E:*:*:*)
	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*SV1:*:*:*)
	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    *:UNICOS/mp:*:*)
	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
	exit 0 ;;
    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
        exit 0 ;;
    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
	exit 0 ;;
    sparc*:BSD/OS:*:*)
	echo sparc-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
	# Determine whether the default compiler uses glibc.
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <features.h>
	#if __GLIBC__ >= 2
	LIBC=gnu
	#else
	LIBC=
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
	exit 0 ;;
    i*:CYGWIN*:*)
	echo ${UNAME_MACHINE}-pc-cygwin
	exit 0 ;;
    i*:MINGW*:*)
	echo ${UNAME_MACHINE}-pc-mingw32
	exit 0 ;;
    i*:PW*:*)
	echo ${UNAME_MACHINE}-pc-pw32
	exit 0 ;;
    x86:Interix*:[34]*)
	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
	exit 0 ;;
    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
	echo i${UNAME_MACHINE}-pc-mks
	exit 0 ;;
    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
	# UNAME_MACHINE based on the output of uname instead of i386?
	echo i586-pc-interix
	exit 0 ;;
    i*:UWIN*:*)
	echo ${UNAME_MACHINE}-pc-uwin
	exit 0 ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin
	exit 0 ;;
    prep*:SunOS:5.*:*)
	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    *:GNU:*:*)
	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
	exit 0 ;;
    i*86:Minix:*:*)
	echo ${UNAME_MACHINE}-pc-minix
	exit 0 ;;
    arm*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    cris:Linux:*:*)
	echo cris-axis-linux-gnu
	exit 0 ;;
    ia64:Linux:*:*)
	echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu
	exit 0 ;;
    m68*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    mips:Linux:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#undef CPU
	#undef mips
	#undef mipsel
	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
	CPU=mipsel
	#else
	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
	CPU=mips
	#else
	CPU=
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
	;;
    mips64:Linux:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#undef CPU
	#undef mips64
	#undef mips64el
	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
	CPU=mips64el
	#else
	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
	CPU=mips64
	#else
	CPU=
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
	;;
    ppc:Linux:*:*)
	echo powerpc-${VENDOR:-unknown}-linux-gnu
	exit 0 ;;
    ppc64:Linux:*:*)
	echo powerpc64-${VENDOR:-unknown}-linux-gnu
	exit 0 ;;
    alpha:Linux:*:*)
	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
	  EV5)   UNAME_MACHINE=alphaev5 ;;
	  EV56)  UNAME_MACHINE=alphaev56 ;;
	  PCA56) UNAME_MACHINE=alphapca56 ;;
	  PCA57) UNAME_MACHINE=alphapca56 ;;
	  EV6)   UNAME_MACHINE=alphaev6 ;;
	  EV67)  UNAME_MACHINE=alphaev67 ;;
	  EV68*) UNAME_MACHINE=alphaev68 ;;
        esac
	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
	exit 0 ;;
    parisc:Linux:*:* | hppa:Linux:*:*)
	# Look for CPU level
	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
	  *)    echo hppa-unknown-linux-gnu ;;
	esac
	exit 0 ;;
    parisc64:Linux:*:* | hppa64:Linux:*:*)
	echo hppa64-unknown-linux-gnu
	exit 0 ;;
    s390:Linux:*:* | s390x:Linux:*:*)
	echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu
	exit 0 ;;
    sh64*:Linux:*:*)
    	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    sh*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    sparc:Linux:*:* | sparc64:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    x86_64:Linux:*:*)
	echo x86_64-${VENDOR:-unknown}-linux-gnu
	exit 0 ;;
    i*86:Linux:*:*)
	# The BFD linker knows what the default object file format is, so
	# first see if it will tell us. cd to the root directory to prevent
	# problems with other programs or directories called `ld' in the path.
	# Set LC_ALL=C to ensure ld outputs messages in English.
	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
			 | sed -ne '/supported targets:/!d
				    s/[ 	][ 	]*/ /g
				    s/.*supported targets: *//
				    s/ .*//
				    p'`
        case "$ld_supported_targets" in
	  elf32-i386)
		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
		;;
	  a.out-i386-linux)
		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
		exit 0 ;;
	  coff-i386)
		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
		exit 0 ;;
	  "")
		# Either a pre-BFD a.out linker (linux-gnuoldld) or
		# one that does not give us useful --help.
		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
		exit 0 ;;
	esac
	# Determine whether the default compiler is a.out or elf
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <features.h>
	#ifdef __ELF__
	# ifdef __GLIBC__
	#  if __GLIBC__ >= 2
	LIBC=gnu
	#  else
	LIBC=gnulibc1
	#  endif
	# else
	LIBC=gnulibc1
	# endif
	#else
	#ifdef __INTEL_COMPILER
	LIBC=gnu
	#else
	LIBC=gnuaout
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0
	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
	;;
    i*86:DYNIX/ptx:4*:*)
	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
	# earlier versions are messed up and put the nodename in both
	# sysname and nodename.
	echo i386-sequent-sysv4
	exit 0 ;;
    i*86:UNIX_SV:4.2MP:2.*)
        # Unixware is an offshoot of SVR4, but it has its own version
        # number series starting with 2...
        # I am not positive that other SVR4 systems won't match this,
	# I just have to hope.  -- rms.
        # Use sysv4.2uw... so that sysv4* matches it.
	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
	exit 0 ;;
    i*86:OS/2:*:*)
	# If we were able to find `uname', then EMX Unix compatibility
	# is probably installed.
	echo ${UNAME_MACHINE}-pc-os2-emx
	exit 0 ;;
    i*86:XTS-300:*:STOP)
	echo ${UNAME_MACHINE}-unknown-stop
	exit 0 ;;
    i*86:atheos:*:*)
	echo ${UNAME_MACHINE}-unknown-atheos
	exit 0 ;;
    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
	echo i386-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    i*86:*DOS:*:*)
	echo ${UNAME_MACHINE}-pc-msdosdjgpp
	exit 0 ;;
    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
	else
		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
	fi
	exit 0 ;;
    i*86:*:5:[78]*)
	case `/bin/uname -X | grep "^Machine"` in
	    *486*)	     UNAME_MACHINE=i486 ;;
	    *Pentium)	     UNAME_MACHINE=i586 ;;
	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
	esac
	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
	exit 0 ;;
    i*86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
			&& UNAME_MACHINE=i686
		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
			&& UNAME_MACHINE=i686
		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-pc-sysv32
	fi
	exit 0 ;;
    pc:*:*:*)
	# Left here for compatibility:
        # uname -m prints for DJGPP always 'pc', but it prints nothing about
        # the processor, so we play safe by assuming i386.
	echo i386-pc-msdosdjgpp
        exit 0 ;;
    Intel:Mach:3*:*)
	echo i386-pc-mach3
	exit 0 ;;
    paragon:*:*:*)
	echo i860-intel-osf1
	exit 0 ;;
    i860:*:4.*:*) # i860-SVR4
	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit 0 ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv
	exit 0 ;;
    mc68k:UNIX:SYSTEM5:3.51m)
	echo m68k-convergent-sysv
	exit 0 ;;
    M680?0:D-NIX:5.3:*)
	echo m68k-diab-dnix
	exit 0 ;;
    M68*:*:R3V[567]*:*)
	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
	OS_REL=''
	test -r /etc/.relid \
	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
          && echo i486-ncr-sysv4 && exit 0 ;;
    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
	echo m68k-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit 0 ;;
    TSUNAMI:LynxOS:2.*:*)
	echo sparc-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    rs6000:LynxOS:2.*:*)
	echo rs6000-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
	echo powerpc-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    SM[BE]S:UNIX_SV:*:*)
	echo mips-dde-sysv${UNAME_RELEASE}
	exit 0 ;;
    RM*:ReliantUNIX-*:*:*)
	echo mips-sni-sysv4
	exit 0 ;;
    RM*:SINIX-*:*:*)
	echo mips-sni-sysv4
	exit 0 ;;
    *:SINIX-*:*:*)
	if uname -p 2>/dev/null >/dev/null ; then
		UNAME_MACHINE=`(uname -p) 2>/dev/null`
		echo ${UNAME_MACHINE}-sni-sysv4
	else
		echo ns32k-sni-sysv
	fi
	exit 0 ;;
    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                      # says <Richard.M.Bartel at ccMail.Census.GOV>
        echo i586-unisys-sysv4
        exit 0 ;;
    *:UNIX_System_V:4*:FTX*)
	# From Gerald Hewes <hewes at openmarket.com>.
	# How about differentiating between stratus architectures? -djm
	echo hppa1.1-stratus-sysv4
	exit 0 ;;
    *:*:*:FTX*)
	# From seanf at swdc.stratus.com.
	echo i860-stratus-sysv4
	exit 0 ;;
    *:VOS:*:*)
	# From Paul.Green at stratus.com.
	echo hppa1.1-stratus-vos
	exit 0 ;;
    mc68*:A/UX:*:*)
	echo m68k-apple-aux${UNAME_RELEASE}
	exit 0 ;;
    news*:NEWS-OS:6*:*)
	echo mips-sony-newsos6
	exit 0 ;;
    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
	if [ -d /usr/nec ]; then
	        echo mips-nec-sysv${UNAME_RELEASE}
	else
	        echo mips-unknown-sysv${UNAME_RELEASE}
	fi
        exit 0 ;;
    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
	echo powerpc-be-beos
	exit 0 ;;
    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
	echo powerpc-apple-beos
	exit 0 ;;
    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
	echo i586-pc-beos
	exit 0 ;;
    SX-4:SUPER-UX:*:*)
	echo sx4-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    SX-5:SUPER-UX:*:*)
	echo sx5-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    SX-6:SUPER-UX:*:*)
	echo sx6-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    Power*:Rhapsody:*:*)
	echo powerpc-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Rhapsody:*:*)
	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Darwin:*:*)
	case `uname -p` in
	    *86) UNAME_PROCESSOR=i686 ;;
	    powerpc) UNAME_PROCESSOR=powerpc ;;
	esac
	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
	exit 0 ;;
    *:procnto*:*:* | *:QNX:[0123456789]*:*)
	UNAME_PROCESSOR=`uname -p`
	if test "$UNAME_PROCESSOR" = "x86"; then
		UNAME_PROCESSOR=i386
		UNAME_MACHINE=pc
	fi
	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
	exit 0 ;;
    *:QNX:*:4*)
	echo i386-pc-qnx
	exit 0 ;;
    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
	echo nsr-tandem-nsk${UNAME_RELEASE}
	exit 0 ;;
    *:NonStop-UX:*:*)
	echo mips-compaq-nonstopux
	exit 0 ;;
    BS2000:POSIX*:*:*)
	echo bs2000-siemens-sysv
	exit 0 ;;
    DS/*:UNIX_System_V:*:*)
	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
	exit 0 ;;
    *:Plan9:*:*)
	# "uname -m" is not consistent, so use $cputype instead. 386
	# is converted to i386 for consistency with other x86
	# operating systems.
	if test "$cputype" = "386"; then
	    UNAME_MACHINE=i386
	else
	    UNAME_MACHINE="$cputype"
	fi
	echo ${UNAME_MACHINE}-unknown-plan9
	exit 0 ;;
    *:TOPS-10:*:*)
	echo pdp10-unknown-tops10
	exit 0 ;;
    *:TENEX:*:*)
	echo pdp10-unknown-tenex
	exit 0 ;;
    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
	echo pdp10-dec-tops20
	exit 0 ;;
    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
	echo pdp10-xkl-tops20
	exit 0 ;;
    *:TOPS-20:*:*)
	echo pdp10-unknown-tops20
	exit 0 ;;
    *:ITS:*:*)
	echo pdp10-unknown-its
	exit 0 ;;
    SEI:*:*:SEIUX)
        echo mips-sei-seiux${UNAME_RELEASE}
	exit 0 ;;
esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

eval $set_cc_for_build
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
     I don't know....  */
  printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
  printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
          "4"
#else
	  ""
#endif
         ); exit (0);
#endif
#endif

#if defined (__arm) && defined (__acorn) && defined (__unix)
  printf ("arm-acorn-riscix"); exit (0);
#endif

#if defined (hp300) && !defined (hpux)
  printf ("m68k-hp-bsd\n"); exit (0);
#endif

#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
  int version;
  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
  if (version < 4)
    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
  else
    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
  exit (0);
#endif

#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
  printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
  printf ("ns32k-encore-mach\n"); exit (0);
#else
  printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif

#if defined (__386BSD__)
  printf ("i386-pc-bsd\n"); exit (0);
#endif

#if defined (sequent)
#if defined (i386)
  printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
  printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif

#if defined (_SEQUENT_)
    struct utsname un;

    uname(&un);

    if (strncmp(un.version, "V2", 2) == 0) {
	printf ("i386-sequent-ptx2\n"); exit (0);
    }
    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
	printf ("i386-sequent-ptx1\n"); exit (0);
    }
    printf ("i386-sequent-ptx\n"); exit (0);

#endif

#if defined (vax)
# if !defined (ultrix)
#  include <sys/param.h>
#  if defined (BSD)
#   if BSD == 43
      printf ("vax-dec-bsd4.3\n"); exit (0);
#   else
#    if BSD == 199006
      printf ("vax-dec-bsd4.3reno\n"); exit (0);
#    else
      printf ("vax-dec-bsd\n"); exit (0);
#    endif
#   endif
#  else
    printf ("vax-dec-bsd\n"); exit (0);
#  endif
# else
    printf ("vax-dec-ultrix\n"); exit (0);
# endif
#endif

#if defined (alliant) && defined (i860)
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0

# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }

# Convex versions that predate uname can use getsysinfo(1)

if [ -x /usr/convex/getsysinfo ]
then
    case `getsysinfo -f cpu_type` in
    c1*)
	echo c1-convex-bsd
	exit 0 ;;
    c2*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
	exit 0 ;;
    c34*)
	echo c34-convex-bsd
	exit 0 ;;
    c38*)
	echo c38-convex-bsd
	exit 0 ;;
    c4*)
	echo c4-convex-bsd
	exit 0 ;;
    esac
fi

cat >&2 <<EOF
$0: unable to guess system type

This script, last modified $timestamp, has failed to recognize
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from

    ftp://ftp.gnu.org/pub/gnu/config/

If the version you run ($0) is already up to date, please
send the following data and any information you think might be
pertinent to <config-patches at gnu.org> in order to provide the needed
information to handle your system.

config.guess timestamp = $timestamp

uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`

hostinfo               = `(hostinfo) 2>/dev/null`
/bin/universe          = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch              = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`

UNAME_MACHINE = ${UNAME_MACHINE}
UNAME_RELEASE = ${UNAME_RELEASE}
UNAME_SYSTEM  = ${UNAME_SYSTEM}
UNAME_VERSION = ${UNAME_VERSION}
EOF

exit 1

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
-------------- next part --------------
/* config.h.in.  Generated from configure.ac by autoheader.  */

/* obsolete architecture string */
#undef ARCHNAME

/* CPU type */
#undef ARCH_CPU

/* OS type */
#undef ARCH_OS

/* OS Vendor */
#undef ARCH_VENDOR

/* switch headers to autoconf-support */
#undef AUTOTOOLS_BUILD

/* Define to 1 if the `closedir' function returns void instead of `int'. */
#undef CLOSEDIR_VOID

/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
   systems. This function is required for `alloca.c' support on those systems.
   */
#undef CRAY_STACKSEG_END

/* Define to 1 if using `alloca.c'. */
#undef C_ALLOCA

/* UG memory allocation model */
#undef DYNAMIC_MEMORY_ALLOCMODEL

/* Define to dummy `main' function (if any) required to link to the Fortran
   libraries. */
#undef F77_DUMMY_MAIN

/* Define to a macro mangling the given C identifier (in lower and upper
   case), which must not contain underscores, for linking with Fortran. */
#undef F77_FUNC

/* As F77_FUNC, but for C identifiers containing underscores. */
#undef F77_FUNC_

/* Define to alternate name for `main' routine that is called from a `main' in
   the Fortran libraries. */
#undef F77_MAIN

/* Define if F77 and FC dummy `main' functions are identical. */
#undef FC_DUMMY_MAIN_EQ_F77

/* Define to 1 if you have `alloca', as a function or macro. */
#undef HAVE_ALLOCA

/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
   */
#undef HAVE_ALLOCA_H

/* Define to 1 if you have the <arpa/inet.h> header file. */
#undef HAVE_ARPA_INET_H

/* Define to 1 if you have the `bzero' function. */
#undef HAVE_BZERO

/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
   */
#undef HAVE_DIRENT_H

/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
#undef HAVE_DOPRNT

/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H

/* Define to 1 if you have the <float.h> header file. */
#undef HAVE_FLOAT_H

/* Define to 1 if you have the `floor' function. */
#undef HAVE_FLOOR

/* Define to 1 if you have the `fork' function. */
#undef HAVE_FORK

/* Define to 1 if you have the `gethostbyaddr' function. */
#undef HAVE_GETHOSTBYADDR

/* Define to 1 if you have the `gethostbyname' function. */
#undef HAVE_GETHOSTBYNAME

/* Define to 1 if you have the `gethrtime' function. */
#undef HAVE_GETHRTIME

/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H

/* Define to 1 if you have the `famg' library (-lfamg). */
#undef HAVE_LIBFAMG

/* Define to 1 if you have the `m' library (-lm). */
#undef HAVE_LIBM

/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H

/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
   to 0 otherwise. */
#undef HAVE_MALLOC

/* Define to 1 if you have the <malloc.h> header file. */
#undef HAVE_MALLOC_H

/* Define to 1 if you have the `memmove' function. */
#undef HAVE_MEMMOVE

/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H

/* Define to 1 if you have the `memset' function. */
#undef HAVE_MEMSET

/* Define to 1 if you have the `mkdir' function. */
#undef HAVE_MKDIR

/* Define if you have the MPI library. */
#undef HAVE_MPI

/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
#undef HAVE_NDIR_H

/* Define to 1 if you have the <netdb.h> header file. */
#undef HAVE_NETDB_H

/* Define to 1 if you have the <netinet/in.h> header file. */
#undef HAVE_NETINET_IN_H

/* Define to 1 if you have the `pow' function. */
#undef HAVE_POW

/* Define to 1 if the system has the type `ptrdiff_t'. */
#undef HAVE_PTRDIFF_T

/* Define to 1 if your system has a GNU libc compatible `realloc' function,
   and to 0 otherwise. */
#undef HAVE_REALLOC

/* Define to 1 if you have the `socket' function. */
#undef HAVE_SOCKET

/* Define to 1 if you have the `sqrt' function. */
#undef HAVE_SQRT

/* Define to 1 if `stat' has the bug that it succeeds when given the
   zero-length file name argument. */
#undef HAVE_STAT_EMPTY_STRING_BUG

/* Define to 1 if stdbool.h conforms to C99. */
#undef HAVE_STDBOOL_H

/* Define to 1 if you have the <stddef.h> header file. */
#undef HAVE_STDDEF_H

/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H

/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H

/* Define to 1 if you have the `strchr' function. */
#undef HAVE_STRCHR

/* Define to 1 if you have the `strdup' function. */
#undef HAVE_STRDUP

/* Define to 1 if you have the `strftime' function. */
#undef HAVE_STRFTIME

/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H

/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H

/* Define to 1 if you have the `strrchr' function. */
#undef HAVE_STRRCHR

/* Define to 1 if you have the `strstr' function. */
#undef HAVE_STRSTR

/* Define to 1 if you have the `strtol' function. */
#undef HAVE_STRTOL

/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
   */
#undef HAVE_SYS_DIR_H

/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
   */
#undef HAVE_SYS_NDIR_H

/* Define to 1 if you have the <sys/param.h> header file. */
#undef HAVE_SYS_PARAM_H

/* Define to 1 if you have the <sys/socket.h> header file. */
#undef HAVE_SYS_SOCKET_H

/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H

/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H

/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H

/* Define to 1 if you have the <values.h> header file. */
#undef HAVE_VALUES_H

/* Define to 1 if you have the `vfork' function. */
#undef HAVE_VFORK

/* Define to 1 if you have the <vfork.h> header file. */
#undef HAVE_VFORK_H

/* Define to 1 if you have the `vprintf' function. */
#undef HAVE_VPRINTF

/* Define to 1 if `fork' works. */
#undef HAVE_WORKING_FORK

/* Define to 1 if `vfork' works. */
#undef HAVE_WORKING_VFORK

/* Define to 1 if the system has the type `_Bool'. */
#undef HAVE__BOOL

/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
   slash. */
#undef LSTAT_FOLLOWS_SLASHED_SYMLINK

/* define if no FORTRAN-compiler is available */
#undef NOF77

/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT

/* Define to the full name of this package. */
#undef PACKAGE_NAME

/* Define to the full name and version of this package. */
#undef PACKAGE_STRING

/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME

/* Define to the version of this package. */
#undef PACKAGE_VERSION

/* Define to 1 if the C compiler supports function prototypes. */
#undef PROTOTYPES

/* Define to 1 if the `setvbuf' function takes the buffering type as its
   second argument and the buffer pointer as the third, as on System V before
   release 3. */
#undef SETVBUF_REVERSED

/* If using the C implementation of alloca, define if you know the
   direction of stack growth for your system; otherwise it will be
   automatically deduced at run-time.
	STACK_DIRECTION > 0 => grows toward higher addresses
	STACK_DIRECTION < 0 => grows toward lower addresses
	STACK_DIRECTION = 0 => direction of growth unknown */
#undef STACK_DIRECTION

/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS

/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
#undef TIME_WITH_SYS_TIME

/* use the Athena Text Widget */
#undef USE_XAW

/* Define to 1 if your processor stores words with the most significant byte
   first (like Motorola and SPARC, unlike Intel and VAX). */
#undef WORDS_BIGENDIAN

/* Define to 1 if the X Window System is missing or not being used. */
#undef X_DISPLAY_MISSING

/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
   `char[]'. */
#undef YYTEXT_POINTER

/* Define like PROTOTYPES; this can be used by system headers. */
#undef __PROTOTYPES

/* Define to empty if `const' does not conform to ANSI C. */
#undef const

/* Define to `__inline__' or `__inline' if that's what the C compiler
   calls it, or to nothing if 'inline' is not supported under any name.  */
#ifndef __cplusplus
#undef inline
#endif

/* Define to rpl_malloc if the replacement function should be used. */
#undef malloc

/* Define to `int' if <sys/types.h> does not define. */
#undef mode_t

/* Define to `int' if <sys/types.h> does not define. */
#undef pid_t

/* Define to rpl_realloc if the replacement function should be used. */
#undef realloc

/* Define to `unsigned' if <sys/types.h> does not define. */
#undef size_t

/* Define as `fork' if `vfork' does not work. */
#undef vfork
-------------- next part --------------
#! /bin/sh
# Configuration validation subroutine script.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.

timestamp='2003-06-18'

# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine.  It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Please send patches to <config-patches at gnu.org>.  Submit a context
# diff and a properly formatted ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.

# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support.  The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.

# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.

me=`echo "$0" | sed -e 's,.*/,,'`

usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS
       $0 [OPTION] ALIAS

Canonicalize a configuration name.

Operation modes:
  -h, --help         print this help, then exit
  -t, --time-stamp   print date of last modification, then exit
  -v, --version      print version number, then exit

Report bugs and patches to <config-patches at gnu.org>."

version="\
GNU config.sub ($timestamp)

Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.

This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

help="
Try \`$me --help' for more information."

# Parse command line
while test $# -gt 0 ; do
  case $1 in
    --time-stamp | --time* | -t )
       echo "$timestamp" ; exit 0 ;;
    --version | -v )
       echo "$version" ; exit 0 ;;
    --help | --h* | -h )
       echo "$usage"; exit 0 ;;
    -- )     # Stop option processing
       shift; break ;;
    - )	# Use stdin as input.
       break ;;
    -* )
       echo "$me: invalid option $1$help"
       exit 1 ;;

    *local*)
       # First pass through any local machine types.
       echo $1
       exit 0;;

    * )
       break ;;
  esac
done

case $# in
 0) echo "$me: missing argument$help" >&2
    exit 1;;
 1) ;;
 *) echo "$me: too many arguments$help" >&2
    exit 1;;
esac

# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
  *)
    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
    if [ $basic_machine != $1 ]
    then os=`echo $1 | sed 's/.*-/-/'`
    else os=; fi
    ;;
esac

### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work.  We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
	-sun*os*)
		# Prevent following clause from handling this invalid input.
		;;
	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
	-apple | -axis)
		os=
		basic_machine=$1
		;;
	-sim | -cisco | -oki | -wec | -winbond)
		os=
		basic_machine=$1
		;;
	-scout)
		;;
	-wrs)
		os=-vxworks
		basic_machine=$1
		;;
	-chorusos*)
		os=-chorusos
		basic_machine=$1
		;;
 	-chorusrdb)
 		os=-chorusrdb
		basic_machine=$1
 		;;
	-hiux*)
		os=-hiuxwe2
		;;
	-sco5)
		os=-sco3.2v5
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco4)
		os=-sco3.2v4
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco3.2.[4-9]*)
		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco3.2v[4-9]*)
		# Don't forget version if it is 3.2v4 or newer.
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco*)
		os=-sco3.2v2
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-udk*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-isc)
		os=-isc2.2
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-clix*)
		basic_machine=clipper-intergraph
		;;
	-isc*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-lynx*)
		os=-lynxos
		;;
	-ptx*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
		;;
	-windowsnt*)
		os=`echo $os | sed -e 's/windowsnt/winnt/'`
		;;
	-psos*)
		os=-psos
		;;
	-mint | -mint[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;
esac

# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
	# Recognize the basic CPU types without company name.
	# Some are omitted here because they have special meanings below.
	1750a | 580 \
	| a29k \
	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
	| c4x | clipper \
	| d10v | d30v | dlx | dsp16xx \
	| fr30 | frv \
	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
	| i370 | i860 | i960 | ia64 \
	| ip2k \
	| m32r | m68000 | m68k | m88k | mcore \
	| mips | mipsbe | mipseb | mipsel | mipsle \
	| mips16 \
	| mips64 | mips64el \
	| mips64vr | mips64vrel \
	| mips64orion | mips64orionel \
	| mips64vr4100 | mips64vr4100el \
	| mips64vr4300 | mips64vr4300el \
	| mips64vr5000 | mips64vr5000el \
	| mipsisa32 | mipsisa32el \
	| mipsisa32r2 | mipsisa32r2el \
	| mipsisa64 | mipsisa64el \
	| mipsisa64sb1 | mipsisa64sb1el \
	| mipsisa64sr71k | mipsisa64sr71kel \
	| mipstx39 | mipstx39el \
	| mn10200 | mn10300 \
	| msp430 \
	| ns16k | ns32k \
	| openrisc | or32 \
	| pdp10 | pdp11 | pj | pjl \
	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
	| pyramid \
	| s390 | s390x \
	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
	| sh64 | sh64le \
	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
	| strongarm \
	| tahoe | thumb | tic4x | tic80 | tron \
	| v850 | v850e \
	| we32k \
	| x86 | xscale | xstormy16 | xtensa \
	| z8k)
		basic_machine=$basic_machine-unknown
		;;
	m6811 | m68hc11 | m6812 | m68hc12)
		# Motorola 68HC11/12.
		basic_machine=$basic_machine-unknown
		os=-none
		;;
	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
		;;

	# We use `pc' rather than `unknown'
	# because (1) that's what they normally are, and
	# (2) the word "unknown" tends to confuse beginning users.
	i*86 | x86_64)
	  basic_machine=$basic_machine-pc
	  ;;
	# Object if more than one company name word.
	*-*-*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
	# Recognize the basic CPU types with company name.
	580-* \
	| a29k-* \
	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
	| avr-* \
	| bs2000-* \
	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
	| clipper-* | cydra-* \
	| d10v-* | d30v-* | dlx-* \
	| elxsi-* \
	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
	| h8300-* | h8500-* \
	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
	| i*86-* | i860-* | i960-* | ia64-* \
	| ip2k-* \
	| m32r-* \
	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
	| m88110-* | m88k-* | mcore-* \
	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
	| mips16-* \
	| mips64-* | mips64el-* \
	| mips64vr-* | mips64vrel-* \
	| mips64orion-* | mips64orionel-* \
	| mips64vr4100-* | mips64vr4100el-* \
	| mips64vr4300-* | mips64vr4300el-* \
	| mips64vr5000-* | mips64vr5000el-* \
	| mipsisa32-* | mipsisa32el-* \
	| mipsisa32r2-* | mipsisa32r2el-* \
	| mipsisa64-* | mipsisa64el-* \
	| mipsisa64sb1-* | mipsisa64sb1el-* \
	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
	| mipstx39-* | mipstx39el-* \
	| msp430-* \
	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
	| orion-* \
	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
	| pyramid-* \
	| romp-* | rs6000-* \
	| s390-* | s390x-* \
	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
	| tahoe-* | thumb-* \
	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
	| tron-* \
	| v850-* | v850e-* | vax-* \
	| we32k-* \
	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
	| xtensa-* \
	| ymp-* \
	| z8k-*)
		;;
	# Recognize the various machine names and aliases which stand
	# for a CPU type and a company and sometimes even an OS.
	386bsd)
		basic_machine=i386-unknown
		os=-bsd
		;;
	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
		basic_machine=m68000-att
		;;
	3b*)
		basic_machine=we32k-att
		;;
	a29khif)
		basic_machine=a29k-amd
		os=-udi
		;;
	adobe68k)
		basic_machine=m68010-adobe
		os=-scout
		;;
	alliant | fx80)
		basic_machine=fx80-alliant
		;;
	altos | altos3068)
		basic_machine=m68k-altos
		;;
	am29k)
		basic_machine=a29k-none
		os=-bsd
		;;
	amd64)
		basic_machine=x86_64-pc
		;;
	amdahl)
		basic_machine=580-amdahl
		os=-sysv
		;;
	amiga | amiga-*)
		basic_machine=m68k-unknown
		;;
	amigaos | amigados)
		basic_machine=m68k-unknown
		os=-amigaos
		;;
	amigaunix | amix)
		basic_machine=m68k-unknown
		os=-sysv4
		;;
	apollo68)
		basic_machine=m68k-apollo
		os=-sysv
		;;
	apollo68bsd)
		basic_machine=m68k-apollo
		os=-bsd
		;;
	aux)
		basic_machine=m68k-apple
		os=-aux
		;;
	balance)
		basic_machine=ns32k-sequent
		os=-dynix
		;;
	c90)
		basic_machine=c90-cray
		os=-unicos
		;;
	convex-c1)
		basic_machine=c1-convex
		os=-bsd
		;;
	convex-c2)
		basic_machine=c2-convex
		os=-bsd
		;;
	convex-c32)
		basic_machine=c32-convex
		os=-bsd
		;;
	convex-c34)
		basic_machine=c34-convex
		os=-bsd
		;;
	convex-c38)
		basic_machine=c38-convex
		os=-bsd
		;;
	cray | j90)
		basic_machine=j90-cray
		os=-unicos
		;;
	crds | unos)
		basic_machine=m68k-crds
		;;
	cris | cris-* | etrax*)
		basic_machine=cris-axis
		;;
	da30 | da30-*)
		basic_machine=m68k-da30
		;;
	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
		basic_machine=mips-dec
		;;
	decsystem10* | dec10*)
		basic_machine=pdp10-dec
		os=-tops10
		;;
	decsystem20* | dec20*)
		basic_machine=pdp10-dec
		os=-tops20
		;;
	delta | 3300 | motorola-3300 | motorola-delta \
	      | 3300-motorola | delta-motorola)
		basic_machine=m68k-motorola
		;;
	delta88)
		basic_machine=m88k-motorola
		os=-sysv3
		;;
	dpx20 | dpx20-*)
		basic_machine=rs6000-bull
		os=-bosx
		;;
	dpx2* | dpx2*-bull)
		basic_machine=m68k-bull
		os=-sysv3
		;;
	ebmon29k)
		basic_machine=a29k-amd
		os=-ebmon
		;;
	elxsi)
		basic_machine=elxsi-elxsi
		os=-bsd
		;;
	encore | umax | mmax)
		basic_machine=ns32k-encore
		;;
	es1800 | OSE68k | ose68k | ose | OSE)
		basic_machine=m68k-ericsson
		os=-ose
		;;
	fx2800)
		basic_machine=i860-alliant
		;;
	genix)
		basic_machine=ns32k-ns
		;;
	gmicro)
		basic_machine=tron-gmicro
		os=-sysv
		;;
	go32)
		basic_machine=i386-pc
		os=-go32
		;;
	h3050r* | hiux*)
		basic_machine=hppa1.1-hitachi
		os=-hiuxwe2
		;;
	h8300hms)
		basic_machine=h8300-hitachi
		os=-hms
		;;
	h8300xray)
		basic_machine=h8300-hitachi
		os=-xray
		;;
	h8500hms)
		basic_machine=h8500-hitachi
		os=-hms
		;;
	harris)
		basic_machine=m88k-harris
		os=-sysv3
		;;
	hp300-*)
		basic_machine=m68k-hp
		;;
	hp300bsd)
		basic_machine=m68k-hp
		os=-bsd
		;;
	hp300hpux)
		basic_machine=m68k-hp
		os=-hpux
		;;
	hp3k9[0-9][0-9] | hp9[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hp9k2[0-9][0-9] | hp9k31[0-9])
		basic_machine=m68000-hp
		;;
	hp9k3[2-9][0-9])
		basic_machine=m68k-hp
		;;
	hp9k6[0-9][0-9] | hp6[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hp9k7[0-79][0-9] | hp7[0-79][0-9])
		basic_machine=hppa1.1-hp
		;;
	hp9k78[0-9] | hp78[0-9])
		# FIXME: really hppa2.0-hp
		basic_machine=hppa1.1-hp
		;;
	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
		# FIXME: really hppa2.0-hp
		basic_machine=hppa1.1-hp
		;;
	hp9k8[0-9][13679] | hp8[0-9][13679])
		basic_machine=hppa1.1-hp
		;;
	hp9k8[0-9][0-9] | hp8[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hppa-next)
		os=-nextstep3
		;;
	hppaosf)
		basic_machine=hppa1.1-hp
		os=-osf
		;;
	hppro)
		basic_machine=hppa1.1-hp
		os=-proelf
		;;
	i370-ibm* | ibm*)
		basic_machine=i370-ibm
		;;
# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
	i*86v32)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv32
		;;
	i*86v4*)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv4
		;;
	i*86v)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv
		;;
	i*86sol2)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-solaris2
		;;
	i386mach)
		basic_machine=i386-mach
		os=-mach
		;;
	i386-vsta | vsta)
		basic_machine=i386-unknown
		os=-vsta
		;;
	iris | iris4d)
		basic_machine=mips-sgi
		case $os in
		    -irix*)
			;;
		    *)
			os=-irix4
			;;
		esac
		;;
	isi68 | isi)
		basic_machine=m68k-isi
		os=-sysv
		;;
	m88k-omron*)
		basic_machine=m88k-omron
		;;
	magnum | m3230)
		basic_machine=mips-mips
		os=-sysv
		;;
	merlin)
		basic_machine=ns32k-utek
		os=-sysv
		;;
	mingw32)
		basic_machine=i386-pc
		os=-mingw32
		;;
	miniframe)
		basic_machine=m68000-convergent
		;;
	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;
	mips3*-*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
		;;
	mips3*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
		;;
	mmix*)
		basic_machine=mmix-knuth
		os=-mmixware
		;;
	monitor)
		basic_machine=m68k-rom68k
		os=-coff
		;;
	morphos)
		basic_machine=powerpc-unknown
		os=-morphos
		;;
	msdos)
		basic_machine=i386-pc
		os=-msdos
		;;
	mvs)
		basic_machine=i370-ibm
		os=-mvs
		;;
	ncr3000)
		basic_machine=i486-ncr
		os=-sysv4
		;;
	netbsd386)
		basic_machine=i386-unknown
		os=-netbsd
		;;
	netwinder)
		basic_machine=armv4l-rebel
		os=-linux
		;;
	news | news700 | news800 | news900)
		basic_machine=m68k-sony
		os=-newsos
		;;
	news1000)
		basic_machine=m68030-sony
		os=-newsos
		;;
	news-3600 | risc-news)
		basic_machine=mips-sony
		os=-newsos
		;;
	necv70)
		basic_machine=v70-nec
		os=-sysv
		;;
	next | m*-next )
		basic_machine=m68k-next
		case $os in
		    -nextstep* )
			;;
		    -ns2*)
		      os=-nextstep2
			;;
		    *)
		      os=-nextstep3
			;;
		esac
		;;
	nh3000)
		basic_machine=m68k-harris
		os=-cxux
		;;
	nh[45]000)
		basic_machine=m88k-harris
		os=-cxux
		;;
	nindy960)
		basic_machine=i960-intel
		os=-nindy
		;;
	mon960)
		basic_machine=i960-intel
		os=-mon960
		;;
	nonstopux)
		basic_machine=mips-compaq
		os=-nonstopux
		;;
	np1)
		basic_machine=np1-gould
		;;
	nv1)
		basic_machine=nv1-cray
		os=-unicosmp
		;;
	nsr-tandem)
		basic_machine=nsr-tandem
		;;
	op50n-* | op60c-*)
		basic_machine=hppa1.1-oki
		os=-proelf
		;;
	or32 | or32-*)
		basic_machine=or32-unknown
		os=-coff
		;;
	OSE68000 | ose68000)
		basic_machine=m68000-ericsson
		os=-ose
		;;
	os68k)
		basic_machine=m68k-none
		os=-os68k
		;;
	pa-hitachi)
		basic_machine=hppa1.1-hitachi
		os=-hiuxwe2
		;;
	paragon)
		basic_machine=i860-intel
		os=-osf
		;;
	pbd)
		basic_machine=sparc-tti
		;;
	pbb)
		basic_machine=m68k-tti
		;;
	pc532 | pc532-*)
		basic_machine=ns32k-pc532
		;;
	pentium | p5 | k5 | k6 | nexgen | viac3)
		basic_machine=i586-pc
		;;
	pentiumpro | p6 | 6x86 | athlon | athlon_*)
		basic_machine=i686-pc
		;;
	pentiumii | pentium2 | pentiumiii | pentium3)
		basic_machine=i686-pc
		;;
	pentium4)
		basic_machine=i786-pc
		;;
	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumpro-* | p6-* | 6x86-* | athlon-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentium4-*)
		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pn)
		basic_machine=pn-gould
		;;
	power)	basic_machine=power-ibm
		;;
	ppc)	basic_machine=powerpc-unknown
		;;
	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppcle | powerpclittle | ppc-le | powerpc-little)
		basic_machine=powerpcle-unknown
		;;
	ppcle-* | powerpclittle-*)
		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64)	basic_machine=powerpc64-unknown
		;;
	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
		basic_machine=powerpc64le-unknown
		;;
	ppc64le-* | powerpc64little-*)
		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ps2)
		basic_machine=i386-ibm
		;;
	pw32)
		basic_machine=i586-unknown
		os=-pw32
		;;
	rom68k)
		basic_machine=m68k-rom68k
		os=-coff
		;;
	rm[46]00)
		basic_machine=mips-siemens
		;;
	rtpc | rtpc-*)
		basic_machine=romp-ibm
		;;
	sa29200)
		basic_machine=a29k-amd
		os=-udi
		;;
	sb1)
		basic_machine=mipsisa64sb1-unknown
		;;
	sb1el)
		basic_machine=mipsisa64sb1el-unknown
		;;
	sei)
		basic_machine=mips-sei
		os=-seiux
		;;
	sequent)
		basic_machine=i386-sequent
		;;
	sh)
		basic_machine=sh-hitachi
		os=-hms
		;;
	sh64)
		basic_machine=sh64-unknown
		;;
	sparclite-wrs | simso-wrs)
		basic_machine=sparclite-wrs
		os=-vxworks
		;;
	sps7)
		basic_machine=m68k-bull
		os=-sysv2
		;;
	spur)
		basic_machine=spur-unknown
		;;
	st2000)
		basic_machine=m68k-tandem
		;;
	stratus)
		basic_machine=i860-stratus
		os=-sysv4
		;;
	sun2)
		basic_machine=m68000-sun
		;;
	sun2os3)
		basic_machine=m68000-sun
		os=-sunos3
		;;
	sun2os4)
		basic_machine=m68000-sun
		os=-sunos4
		;;
	sun3os3)
		basic_machine=m68k-sun
		os=-sunos3
		;;
	sun3os4)
		basic_machine=m68k-sun
		os=-sunos4
		;;
	sun4os3)
		basic_machine=sparc-sun
		os=-sunos3
		;;
	sun4os4)
		basic_machine=sparc-sun
		os=-sunos4
		;;
	sun4sol2)
		basic_machine=sparc-sun
		os=-solaris2
		;;
	sun3 | sun3-*)
		basic_machine=m68k-sun
		;;
	sun4)
		basic_machine=sparc-sun
		;;
	sun386 | sun386i | roadrunner)
		basic_machine=i386-sun
		;;
	sv1)
		basic_machine=sv1-cray
		os=-unicos
		;;
	symmetry)
		basic_machine=i386-sequent
		os=-dynix
		;;
	t3e)
		basic_machine=alphaev5-cray
		os=-unicos
		;;
	t90)
		basic_machine=t90-cray
		os=-unicos
		;;
	tic54x | c54x*)
		basic_machine=tic54x-unknown
		os=-coff
		;;
	tic55x | c55x*)
		basic_machine=tic55x-unknown
		os=-coff
		;;
	tic6x | c6x*)
		basic_machine=tic6x-unknown
		os=-coff
		;;
	tx39)
		basic_machine=mipstx39-unknown
		;;
	tx39el)
		basic_machine=mipstx39el-unknown
		;;
	toad1)
		basic_machine=pdp10-xkl
		os=-tops20
		;;
	tower | tower-32)
		basic_machine=m68k-ncr
		;;
	udi29k)
		basic_machine=a29k-amd
		os=-udi
		;;
	ultra3)
		basic_machine=a29k-nyu
		os=-sym1
		;;
	v810 | necv810)
		basic_machine=v810-nec
		os=-none
		;;
	vaxv)
		basic_machine=vax-dec
		os=-sysv
		;;
	vms)
		basic_machine=vax-dec
		os=-vms
		;;
	vpp*|vx|vx-*)
		basic_machine=f301-fujitsu
		;;
	vxworks960)
		basic_machine=i960-wrs
		os=-vxworks
		;;
	vxworks68)
		basic_machine=m68k-wrs
		os=-vxworks
		;;
	vxworks29k)
		basic_machine=a29k-wrs
		os=-vxworks
		;;
	w65*)
		basic_machine=w65-wdc
		os=-none
		;;
	w89k-*)
		basic_machine=hppa1.1-winbond
		os=-proelf
		;;
	xps | xps100)
		basic_machine=xps100-honeywell
		;;
	ymp)
		basic_machine=ymp-cray
		os=-unicos
		;;
	z8k-*-coff)
		basic_machine=z8k-unknown
		os=-sim
		;;
	none)
		basic_machine=none-none
		os=-none
		;;

# Here we handle the default manufacturer of certain CPU types.  It is in
# some cases the only manufacturer, in others, it is the most popular.
	w89k)
		basic_machine=hppa1.1-winbond
		;;
	op50n)
		basic_machine=hppa1.1-oki
		;;
	op60c)
		basic_machine=hppa1.1-oki
		;;
	romp)
		basic_machine=romp-ibm
		;;
	rs6000)
		basic_machine=rs6000-ibm
		;;
	vax)
		basic_machine=vax-dec
		;;
	pdp10)
		# there are many clones, so DEC is not a safe bet
		basic_machine=pdp10-unknown
		;;
	pdp11)
		basic_machine=pdp11-dec
		;;
	we32k)
		basic_machine=we32k-att
		;;
	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
		basic_machine=sh-unknown
		;;
	sh64)
		basic_machine=sh64-unknown
		;;
	sparc | sparcv9 | sparcv9b)
		basic_machine=sparc-sun
		;;
	cydra)
		basic_machine=cydra-cydrome
		;;
	orion)
		basic_machine=orion-highlevel
		;;
	orion105)
		basic_machine=clipper-highlevel
		;;
	mac | mpw | mac-mpw)
		basic_machine=m68k-apple
		;;
	pmac | pmac-mpw)
		basic_machine=powerpc-apple
		;;
	*-unknown)
		# Make sure to match an already-canonicalized machine name.
		;;
	*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
esac

# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
	*-digital*)
		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
		;;
	*-commodore*)
		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
		;;
	*)
		;;
esac

# Decode manufacturer-specific aliases for certain operating systems.

if [ x"$os" != x"" ]
then
case $os in
        # First match some system type aliases
        # that might get confused with valid system types.
	# -solaris* is a basic system type, with this one exception.
	-solaris1 | -solaris1.*)
		os=`echo $os | sed -e 's|solaris1|sunos4|'`
		;;
	-solaris)
		os=-solaris2
		;;
	-svr4*)
		os=-sysv4
		;;
	-unixware*)
		os=-sysv4.2uw
		;;
	-gnu/linux*)
		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
		;;
	# First accept the basic system types.
	# The portable systems comes first.
	# Each alternative MUST END IN A *, to match a version number.
	# -sysv* is not here because it comes later, after sysvr4.
	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
	      | -aos* \
	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
	      | -chorusos* | -chorusrdb* \
	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
	# Remember, each alternative MUST END IN *, to match a version number.
		;;
	-qnx*)
		case $basic_machine in
		    x86-* | i*86-*)
			;;
		    *)
			os=-nto$os
			;;
		esac
		;;
	-nto-qnx*)
		;;
	-nto*)
		os=`echo $os | sed -e 's|nto|nto-qnx|'`
		;;
	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
		;;
	-mac*)
		os=`echo $os | sed -e 's|mac|macos|'`
		;;
	-linux*)
		os=`echo $os | sed -e 's|linux|linux-gnu|'`
		;;
	-sunos5*)
		os=`echo $os | sed -e 's|sunos5|solaris2|'`
		;;
	-sunos6*)
		os=`echo $os | sed -e 's|sunos6|solaris3|'`
		;;
	-opened*)
		os=-openedition
		;;
	-wince*)
		os=-wince
		;;
	-osfrose*)
		os=-osfrose
		;;
	-osf*)
		os=-osf
		;;
	-utek*)
		os=-bsd
		;;
	-dynix*)
		os=-bsd
		;;
	-acis*)
		os=-aos
		;;
	-atheos*)
		os=-atheos
		;;
	-386bsd)
		os=-bsd
		;;
	-ctix* | -uts*)
		os=-sysv
		;;
	-nova*)
		os=-rtmk-nova
		;;
	-ns2 )
		os=-nextstep2
		;;
	-nsk*)
		os=-nsk
		;;
	# Preserve the version number of sinix5.
	-sinix5.*)
		os=`echo $os | sed -e 's|sinix|sysv|'`
		;;
	-sinix*)
		os=-sysv4
		;;
	-triton*)
		os=-sysv3
		;;
	-oss*)
		os=-sysv3
		;;
	-svr4)
		os=-sysv4
		;;
	-svr3)
		os=-sysv3
		;;
	-sysvr4)
		os=-sysv4
		;;
	# This must come after -sysvr4.
	-sysv*)
		;;
	-ose*)
		os=-ose
		;;
	-es1800*)
		os=-ose
		;;
	-xenix)
		os=-xenix
		;;
	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
		os=-mint
		;;
	-aros*)
		os=-aros
		;;
	-kaos*)
		os=-kaos
		;;
	-none)
		;;
	*)
		# Get rid of the `-' at the beginning of $os.
		os=`echo $os | sed 's/[^-]*-//'`
		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
		exit 1
		;;
esac
else

# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.

# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system.  Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.

case $basic_machine in
	*-acorn)
		os=-riscix1.2
		;;
	arm*-rebel)
		os=-linux
		;;
	arm*-semi)
		os=-aout
		;;
	c4x-* | tic4x-*)
		os=-coff
		;;
	# This must come before the *-dec entry.
	pdp10-*)
		os=-tops20
		;;
	pdp11-*)
		os=-none
		;;
	*-dec | vax-*)
		os=-ultrix4.2
		;;
	m68*-apollo)
		os=-domain
		;;
	i386-sun)
		os=-sunos4.0.2
		;;
	m68000-sun)
		os=-sunos3
		# This also exists in the configure program, but was not the
		# default.
		# os=-sunos4
		;;
	m68*-cisco)
		os=-aout
		;;
	mips*-cisco)
		os=-elf
		;;
	mips*-*)
		os=-elf
		;;
	or32-*)
		os=-coff
		;;
	*-tti)	# must be before sparc entry or we get the wrong os.
		os=-sysv3
		;;
	sparc-* | *-sun)
		os=-sunos4.1.1
		;;
	*-be)
		os=-beos
		;;
	*-ibm)
		os=-aix
		;;
	*-wec)
		os=-proelf
		;;
	*-winbond)
		os=-proelf
		;;
	*-oki)
		os=-proelf
		;;
	*-hp)
		os=-hpux
		;;
	*-hitachi)
		os=-hiux
		;;
	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
		os=-sysv
		;;
	*-cbm)
		os=-amigaos
		;;
	*-dg)
		os=-dgux
		;;
	*-dolphin)
		os=-sysv3
		;;
	m68k-ccur)
		os=-rtu
		;;
	m88k-omron*)
		os=-luna
		;;
	*-next )
		os=-nextstep
		;;
	*-sequent)
		os=-ptx
		;;
	*-crds)
		os=-unos
		;;
	*-ns)
		os=-genix
		;;
	i370-*)
		os=-mvs
		;;
	*-next)
		os=-nextstep3
		;;
	*-gould)
		os=-sysv
		;;
	*-highlevel)
		os=-bsd
		;;
	*-encore)
		os=-bsd
		;;
	*-sgi)
		os=-irix
		;;
	*-siemens)
		os=-sysv4
		;;
	*-masscomp)
		os=-rtu
		;;
	f30[01]-fujitsu | f700-fujitsu)
		os=-uxpv
		;;
	*-rom68k)
		os=-coff
		;;
	*-*bug)
		os=-coff
		;;
	*-apple)
		os=-macos
		;;
	*-atari*)
		os=-mint
		;;
	*)
		os=-none
		;;
esac
fi

# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer.  We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
	*-unknown)
		case $os in
			-riscix*)
				vendor=acorn
				;;
			-sunos*)
				vendor=sun
				;;
			-aix*)
				vendor=ibm
				;;
			-beos*)
				vendor=be
				;;
			-hpux*)
				vendor=hp
				;;
			-mpeix*)
				vendor=hp
				;;
			-hiux*)
				vendor=hitachi
				;;
			-unos*)
				vendor=crds
				;;
			-dgux*)
				vendor=dg
				;;
			-luna*)
				vendor=omron
				;;
			-genix*)
				vendor=ns
				;;
			-mvs* | -opened*)
				vendor=ibm
				;;
			-ptx*)
				vendor=sequent
				;;
			-vxsim* | -vxworks* | -windiss*)
				vendor=wrs
				;;
			-aux*)
				vendor=apple
				;;
			-hms*)
				vendor=hitachi
				;;
			-mpw* | -macos*)
				vendor=apple
				;;
			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
				vendor=atari
				;;
			-vos*)
				vendor=stratus
				;;
		esac
		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
		;;
esac

echo $basic_machine$os
exit 0

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
-------------- next part --------------
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects

scriptversion=2005-07-09.11

# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.

case $1 in
  '')
     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
     exit 1;
     ;;
  -h | --h*)
    cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]

Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.

Environment variables:
  depmode     Dependency tracking mode.
  source      Source file read by `PROGRAMS ARGS'.
  object      Object file output by `PROGRAMS ARGS'.
  DEPDIR      directory where to store dependencies.
  depfile     Dependency file to output.
  tmpdepfile  Temporary file to use when outputing dependencies.
  libtool     Whether libtool is used (yes/no).

Report bugs to <bug-automake at gnu.org>.
EOF
    exit $?
    ;;
  -v | --v*)
    echo "depcomp $scriptversion"
    exit $?
    ;;
esac

if test -z "$depmode" || test -z "$source" || test -z "$object"; then
  echo "depcomp: Variables source, object and depmode must be set" 1>&2
  exit 1
fi

# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}

rm -f "$tmpdepfile"

# Some modes work just like other modes, but use different flags.  We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write.  Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
  # HP compiler uses -M and no extra arg.
  gccflag=-M
  depmode=gcc
fi

if test "$depmode" = dashXmstdout; then
   # This is just like dashmstdout with a different argument.
   dashmflag=-xM
   depmode=dashmstdout
fi

case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff.  Hmm.
  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  mv "$tmpdepfile" "$depfile"
  ;;

gcc)
## There are various ways to get dependency output from gcc.  Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
##   up in a subdir.  Having to rename by hand is ugly.
##   (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
##   -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
##   than renaming).
  if test -z "$gccflag"; then
    gccflag=-MD,
  fi
  "$@" -Wp,"$gccflag$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
  sed -e 's/^[^:]*: / /' \
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header).  We avoid this by adding
## dummy dependencies for each header file.  Too bad gcc doesn't do
## this for us directly.
  tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'.  On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

hp)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;

sgi)
  if test "$libtool" = yes; then
    "$@" "-Wp,-MDupdate,$tmpdepfile"
  else
    "$@" -MDupdate "$tmpdepfile"
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"

  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
    echo "$object : \\" > "$depfile"

    # Clip off the initial element (the dependent).  Don't try to be
    # clever and replace this with sed code, as IRIX sed won't handle
    # lines with more than a fixed number of characters (4096 in
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
    # the IRIX cc adds comments like `#:fec' to the end of the
    # dependency line.
    tr ' ' '
' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
    tr '
' ' ' >> $depfile
    echo >> $depfile

    # The second pass generates a dummy entry for each header file.
    tr ' ' '
' < "$tmpdepfile" \
   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
   >> $depfile
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;

aix)
  # The C for AIX Compiler uses -M and outputs the dependencies
  # in a .u file.  In older versions, this file always lives in the
  # current directory.  Also, the AIX compiler puts `$object:' at the
  # start of each line; $object doesn't have directory information.
  # Version 6 uses the directory in both cases.
  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
  tmpdepfile="$stripped.u"
  if test "$libtool" = yes; then
    "$@" -Wc,-M
  else
    "$@" -M
  fi
  stat=$?

  if test -f "$tmpdepfile"; then :
  else
    stripped=`echo "$stripped" | sed 's,^.*/,,'`
    tmpdepfile="$stripped.u"
  fi

  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi

  if test -f "$tmpdepfile"; then
    outname="$stripped.o"
    # Each line is of the form `foo.o: dependent.h'.
    # Do two passes, one to just change these to
    # `$object: dependent.h' and one to simply `dependent.h:'.
    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;

icc)
  # Intel's C compiler understands `-MD -MF file'.  However on
  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
  # ICC 7.0 will fill foo.d with something like
  #    foo.o: sub/foo.c
  #    foo.o: sub/foo.h
  # which is wrong.  We want:
  #    sub/foo.o: sub/foo.c
  #    sub/foo.o: sub/foo.h
  #    sub/foo.c:
  #    sub/foo.h:
  # ICC 7.1 will output
  #    foo.o: sub/foo.c sub/foo.h
  # and will wrap long lines using \ :
  #    foo.o: sub/foo.c ... \
  #     sub/foo.h ... \
  #     ...

  "$@" -MD -MF "$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  # Each line is of the form `foo.o: dependent.h',
  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
  # Do two passes, one to just change these to
  # `$object: dependent.h' and one to simply `dependent.h:'.
  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
  # Some versions of the HPUX 10.20 sed can't process this invocation
  # correctly.  Breaking it into two sed invocations is a workaround.
  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
    sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

tru64)
   # The Tru64 compiler uses -MD to generate dependencies as a side
   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in `foo.d' instead, so we check for that too.
   # Subdirectories are respected.
   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
   test "x$dir" = "x$object" && dir=
   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`

   if test "$libtool" = yes; then
      # With Tru64 cc, shared objects can also be used to make a
      # static library.  This mecanism is used in libtool 1.4 series to
      # handle both shared and static libraries in a single compilation.
      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
      #
      # With libtool 1.5 this exception was removed, and libtool now
      # generates 2 separate objects for the 2 libraries.  These two
      # compilations output dependencies in in $dir.libs/$base.o.d and
      # in $dir$base.o.d.  We have to check for both files, because
      # one of the two compilations can be disabled.  We should prefer
      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
      # automatically cleaned when .libs/ is deleted, while ignoring
      # the former would cause a distcleancheck panic.
      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
      tmpdepfile2=$dir$base.o.d          # libtool 1.5
      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
      "$@" -Wc,-MD
   else
      tmpdepfile1=$dir$base.o.d
      tmpdepfile2=$dir$base.d
      tmpdepfile3=$dir$base.d
      tmpdepfile4=$dir$base.d
      "$@" -MD
   fi

   stat=$?
   if test $stat -eq 0; then :
   else
      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
      exit $stat
   fi

   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
   do
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
      # That's a tab and a space in the [].
      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
      echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;

#nosideeffect)
  # This comment above is used by automake to tell side-effect
  # dependency tracking mechanisms from slower ones.

dashmstdout)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o.
  "$@" || exit $?

  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi

  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done

  test -z "$dashmflag" && dashmflag=-M
  # Require at least two characters before searching for `:'
  # in the target name.  This is to cope with DOS-style filenames:
  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
  "$@" $dashmflag |
    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

dashXmstdout)
  # This case only exists to satisfy depend.m4.  It is never actually
  # run, as this mode is specially recognized in the preamble.
  exit 1
  ;;

makedepend)
  "$@" || exit $?
  # Remove any Libtool call
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi
  # X makedepend
  shift
  cleared=no
  for arg in "$@"; do
    case $cleared in
    no)
      set ""; shift
      cleared=yes ;;
    esac
    case "$arg" in
    -D*|-I*)
      set fnord "$@" "$arg"; shift ;;
    # Strip any option that makedepend may not understand.  Remove
    # the object too, otherwise makedepend will parse it as a source file.
    -*|$object)
      ;;
    *)
      set fnord "$@" "$arg"; shift ;;
    esac
  done
  obj_suffix="`echo $object | sed 's/^.*\././'`"
  touch "$tmpdepfile"
  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile" "$tmpdepfile".bak
  ;;

cpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout.
  "$@" || exit $?

  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi

  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done

  "$@" -E |
    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
    sed '$ s: \\$::' > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  cat < "$tmpdepfile" >> "$depfile"
  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

msvisualcpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o,
  # because we must use -o when running libtool.
  "$@" || exit $?
  IFS=" "
  for arg
  do
    case "$arg" in
    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
	set fnord "$@"
	shift
	shift
	;;
    *)
	set fnord "$@" "$arg"
	shift
	shift
	;;
    esac
  done
  "$@" -E |
  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
  echo "	" >> "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

none)
  exec "$@"
  ;;

*)
  echo "Unknown depmode $depmode" 1>&2
  exit 1
  ;;
esac

exit 0

# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
-------------- next part --------------
#!/bin/sh
# install - install a program, script, or datafile

scriptversion=2005-05-14.22

# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.

# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"

# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=

usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
   or: $0 [OPTION]... SRCFILES... DIRECTORY
   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
   or: $0 [OPTION]... -d DIRECTORIES...

In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.

Options:
-c         (ignored)
-d         create directories instead of installing files.
-g GROUP   $chgrpprog installed files to GROUP.
-m MODE    $chmodprog installed files to MODE.
-o USER    $chownprog installed files to USER.
-s         $stripprog installed files.
-t DIRECTORY  install into DIRECTORY.
-T         report an error if DSTFILE is a directory.
--help     display this help and exit.
--version  display version info and exit.

Environment variables override the default commands:
  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"

while test -n "$1"; do
  case $1 in
    -c) shift
        continue;;

    -d) dir_arg=true
        shift
        continue;;

    -g) chgrpcmd="$chgrpprog $2"
        shift
        shift
        continue;;

    --help) echo "$usage"; exit $?;;

    -m) chmodcmd="$chmodprog $2"
        shift
        shift
        continue;;

    -o) chowncmd="$chownprog $2"
        shift
        shift
        continue;;

    -s) stripcmd=$stripprog
        shift
        continue;;

    -t) dstarg=$2
	shift
	shift
	continue;;

    -T) no_target_directory=true
	shift
	continue;;

    --version) echo "$0 $scriptversion"; exit $?;;

    *)  # When -d is used, all remaining arguments are directories to create.
	# When -t is used, the destination is already specified.
	test -n "$dir_arg$dstarg" && break
        # Otherwise, the last argument is the destination.  Remove it from $@.
	for arg
	do
          if test -n "$dstarg"; then
	    # $@ is not empty: it contains at least $arg.
	    set fnord "$@" "$dstarg"
	    shift # fnord
	  fi
	  shift # arg
	  dstarg=$arg
	done
	break;;
  esac
done

if test -z "$1"; then
  if test -z "$dir_arg"; then
    echo "$0: no input file specified." >&2
    exit 1
  fi
  # It's OK to call `install-sh -d' without argument.
  # This can happen when creating conditional directories.
  exit 0
fi

for src
do
  # Protect names starting with `-'.
  case $src in
    -*) src=./$src ;;
  esac

  if test -n "$dir_arg"; then
    dst=$src
    src=

    if test -d "$dst"; then
      mkdircmd=:
      chmodcmd=
    else
      mkdircmd=$mkdirprog
    fi
  else
    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
    # might cause directories to be created, which would be especially bad
    # if $src (and thus $dsttmp) contains '*'.
    if test ! -f "$src" && test ! -d "$src"; then
      echo "$0: $src does not exist." >&2
      exit 1
    fi

    if test -z "$dstarg"; then
      echo "$0: no destination specified." >&2
      exit 1
    fi

    dst=$dstarg
    # Protect names starting with `-'.
    case $dst in
      -*) dst=./$dst ;;
    esac

    # If destination is a directory, append the input filename; won't work
    # if double slashes aren't ignored.
    if test -d "$dst"; then
      if test -n "$no_target_directory"; then
	echo "$0: $dstarg: Is a directory" >&2
	exit 1
      fi
      dst=$dst/`basename "$src"`
    fi
  fi

  # This sed command emulates the dirname command.
  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`

  # Make sure that the destination directory exists.

  # Skip lots of stat calls in the usual case.
  if test ! -d "$dstdir"; then
    defaultIFS='
	 '
    IFS="${IFS-$defaultIFS}"

    oIFS=$IFS
    # Some sh's can't handle IFS=/ for some reason.
    IFS='%'
    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
    shift
    IFS=$oIFS

    pathcomp=

    while test $# -ne 0 ; do
      pathcomp=$pathcomp$1
      shift
      if test ! -d "$pathcomp"; then
        $mkdirprog "$pathcomp"
	# mkdir can fail with a `File exist' error in case several
	# install-sh are creating the directory concurrently.  This
	# is OK.
	test -d "$pathcomp" || exit
      fi
      pathcomp=$pathcomp/
    done
  fi

  if test -n "$dir_arg"; then
    $doit $mkdircmd "$dst" \
      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }

  else
    dstfile=`basename "$dst"`

    # Make a couple of temp file names in the proper directory.
    dsttmp=$dstdir/_inst.$$_
    rmtmp=$dstdir/_rm.$$_

    # Trap to clean up those temp files at exit.
    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
    trap '(exit $?); exit' 1 2 13 15

    # Copy the file name to the temp name.
    $doit $cpprog "$src" "$dsttmp" &&

    # and set any options; do chmod last to preserve setuid bits.
    #
    # If any of these fail, we abort the whole thing.  If we want to
    # ignore errors from any of these, just make sure not to ignore
    # errors from the above "$doit $cpprog $src $dsttmp" command.
    #
    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&

    # Now rename the file to the real destination.
    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
      || {
	   # The rename failed, perhaps because mv can't rename something else
	   # to itself, or perhaps because mv is so ancient that it does not
	   # support -f.

	   # Now remove or move aside any old file at destination location.
	   # We try this two ways since rm can't unlink itself on some
	   # systems and the destination file might be busy for other
	   # reasons.  In this case, the final cleanup might fail but the new
	   # file should still install successfully.
	   {
	     if test -f "$dstdir/$dstfile"; then
	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
	       || {
		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
		 (exit 1); exit 1
	       }
	     else
	       :
	     fi
	   } &&

	   # Now rename the file to the real destination.
	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
	 }
    }
  fi || { (exit 1); exit 1; }
done

# The final little trick to "correctly" pass the exit status to the exit trap.
{
  (exit 0); exit 0
}

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ltmain.sh
Type: application/octet-stream
Size: 183729 bytes
Desc: not available
Url : https://lists.dune-project.org/pipermail/dune/attachments/20070523/363d073d/ltmain-0001.obj


More information about the Dune mailing list