[Dune] The solution of a scientific task with your sortware

[Victor Nachev]

Good day!

My name is Victor Nachev. I am PhD student at Skolkovo Institute of Science
and Technology. I am faced with the scientific task of building 3D
mechanical rock model with dimensions 30x30x60 mm which consists of grains
with different minerals and grain's geometry close to the real like in
nature and dimensions about 10-1000 nm. After building the model I need to
fill grains with their mechanical properties and boundary conditions and
study propagation of mechanical fractures in the model in tests with
different types of loading.

My questions are the next:

1.Does your software allow to build a 3D mechanical model with 1-100
millions cells?

2. Does your software allow to assign mechanical properties and boundary
conditions to each cell?

2.1. If the answer "yes" in the question 2, what mechanical properties and
boundary conditions are needed for your software to initialize a model?

3. Does your software can build a mesh for such model?

4. Does your software allow to do different tests such as compression and
tensile tests?

5. Does your software allow to calculate fracture propagation in such model?

Thank you for the prompt answer.

Best regards, Victor.

*Victor Nachev*

PhD student,

Skoltech Center for Hydrocarbon Recovery




Mob.+7 (915) 489 84 77

Victor.Nachev at skolkovotech.ru

www.skoltech.ru

[image: Skoltech]

Skolkovo Innovation Center

3 Nobel Street

Moscow

Russia 143026
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.dune-project.org/pipermail/dune/attachments/20171117/24fe34fb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5014 bytes
Desc: not available
URL: <https://lists.dune-project.org/pipermail/dune/attachments/20171117/24fe34fb/attachment.png>